SMA SUNNY TRIPOWER 60 Technical Information page 43

SMA Solar Technology AG
54
60
70
80
40226 Event number (Evt1): NaN
40228 Event number (Evt2): NaN
Manufacturer-specific event code (EvtVnd1),
(SMA: messages regarding the AC utility grid):
Event bit
0
1
2
3
4
5
6
40230
7
8
9
10
11
12
13
14
15
16
25
Technical Information
The inverter waits until an internal measured value
returns to the permitted range (e.g. temperature
too high), before it reconnects to the utility grid.
The inverter should run in this mode for the majori-
ty of the time: grid feed-in runs and the utility grid
is free of errors.
The inverter is disconnected from the utility grid
and stays in fail safe mode until powered off or
rebooted.
If the inverter can not perform grid feed-in for a
certain time (a few minutes), it switches to this
status.
Assigned event IDs
1, 2, 3 (events)
4, 5, 6 (events)
7, 8, 9 (events)
10, 11, 12 (events)
13, 14, 15 (events)
16, 17 (events)
18, 25, 26, 27, 28, 29, 30, 38, 39, 41, 42, 43,
44, 45, 48, 49, 50 (events)
19, 20, 21 (events)
22, 23, 24 (events)
51, 52, 53 (events)
31, 32, 33 (events)
54, 55, 56 (events)
34 (event)
35, 36, 37 (events)
40 (event)
61 (event)
62 (event)
211 (warning)
STP60 SunSpec Modbus Profile – Assignment Tables
2
2
2
STP60-SunSpec_Modbus-TI-en-12
bitfield32 RO
bitfield32 RO
bitfield32 RO
43