Table of Contents
Advertisement
iM80 Patient Monitor Service Manual
Power
Processor
Net Port
Parallel Port
EMS Memory
Serial Port
Headphone Interface
Touch Screen Interface
USB
VGA
LCD
Keyboard
GPIO
Watchdog Timer
Power Consumption
Size
Operating System
6.1.2 ECG Module
The ECG module fulfills the functions of ECG detection and measurement, and then sends the
results to the main control board through serial port. The ECG module includes ECG monitoring
part and TEMP monitoring part. Please refer to Patient Monitor User Manual for the ECG
specification.
5V, 12V
ARM926EJ-S
Work frequency: 400MHz
External bus frequency: 133MHz
Dictate Cache: 32K bytes
Data Cache: 32K bytes
10M/100M standard Ethernet port
1 parallel port
SDRAM: 64M byte
Flash: program 8M bytes + data 64M bytes
Configure in 4 serial ports and 6 serial ports way
Loudspeaker output
1 interface.
2 standard USB HOST interfaces, 1 standard DEVICE interface (2.0
specification)
1 VGA output port, standard VGA outputting
1 TFT LCD interface, 1024*768 (highest resolution)
1 PS/2 keyboard interface
10
1.6s
5.934 W (max)/1.775W(typical)
134 mm×107 mm
Linux
- 25 -
Principle Introduction
Hide quick links:
Advertisement
Table of Contents
