iM80 Patient Monitor Service Manual
DB 9 interface (RS232)
RJ45 interface (Network)
USB interface
DB15 interface (VGA visual signal interface)
BNC interface (synchronous defibrillation/analog output interface)
SD card interface (data storage interface)
Nurse call interface
6.2.1 DB9 Interface
All monitors are configured with a DB9 interface.
It is used to connect the monitor to a computer for monitoring information collection, or to a
monitoring system such as MFM-CMS.
6.2.2 RJ45 Interface
All monitors are configured with an RJ45 interface.
It is used to connect the monitor to a computer for updating or monitoring information collection,
or to a monitoring system such as MFM-CMS.
6.2.3 USB Interface
All monitors are configured with a USB interface.
It is used to connect external devices that support USB protocol to the monitor.
6.2.4 DB15 Interface
All monitors are configured with a DB15 interface.
It is used to output the VGA visual signals of monitor to the external display device that supports
VGA signals.
6.2.5 BNC Interface
All monitors are configured with a BNC interface.
It is used to output synchronous defibrillation and analog output signals.
- 29 -
Principle Introduction