Chapter 2 Safety Guidance; Introduction; General Information; Safety Precautions - EDAN iM80 Servise Manual

iM80 Patient Monitor Service Manual

Chapter 2 Safety Guidance

2.1 Introduction

This service manual is a reference for periodic preventive maintenance and corrective service
procedures for the iM80 patient monitor. It provides information on troubleshooting, assembly
procedures, and instructions for functional testing as well as performance verification. The
manual is intended for use only by technically qualified service personnel.
Please follow the instructions exactly in accordance with this manual during service.
Failure to do so might result in damage to the monitor or personal injury.

2.2 General Information

iM80 Patient Monitor (hereinafter called monitor) is designed in accordance with the
international safety requirements in IEC/ EN 60601-1 for medical electrical equipment.
Classification information of this equipment is as follows:
Anti-electroshock Type
Anti-electroshock Degree
Ingress Protection
Degree of Safety in Presence of
Flammable Gases
Working System
EMC Type

2.3 Safety Precautions

To avoid possible injury, please observe the following precautions during the operation of the
monitor.
WARNING
Class I equipment and internal powered equipment
NIBP, SpO , CO , AG
2 2
ECG, TEMP, IBP, C.O.
IPX1
Not suitable for use in presence of flammable gases
Continuous operation equipment
Group 1 Class A
- 4 -
Safety Guidance
BF
CF