Control Panel - Quick BTQ140 User Manual

PROPELLER
PROPELLER FITTING
Insert the drive pin A into the hole on the gearleg shaft B; assemble the propeller C to the gearleg, making it fit in correctly with
the drive pin A; fix the propeller with the self-braking nut D. The anode E must be locked with the screw F soaked with building
adhesive (such as Loctite).
G
PROPELLERS FITTING
Insert the drive pins A into the hole on the gearleg shafts B; assemble the propellers C to the gearleg, making it fit in correctly
with the drive pins A; fix the propellers with the self-braking nuts D.
The anodes E must be locked with the screws F soaked with building adhesive (such as Loctite).
WARNING: on conclusion of assembly, make sure that
the propeller is exactly positioned at the central point
of the tunnel.

CONTROL PANEL

To install the control panel, consult the "TCD 1022 - TCD 10422 - TCD 1044 instruction manuals.
BOW THRUSTER BTQ140 - BTQ185 IT EN - REV006B
F
D
E
A
A
C
B
A
B
C
INSTALLATION
D
F
E
E
F
G
EN
21