Control Panel - Quick BTQ300 Series User Manual

PROPELLER
F
G
E
PROPELLER FITTING
Insert the drive keys A onto the gearleg B; assemble the propellers C and D at the gearleg, fitting them onto the drive pins A
and anchor the propellers with the self-braking nuts E.
The anodes F fit onto the nut E and are then anchored with the screws G which must be wetted with thread-locking adhesive
(such as loctite).

CONTROL PANEL

To install the control panel, consult the "TCD 1022 - TCD 10422 - TCD 1044" instruction manuals.
BOW THRUSTER BTQ250 - BTQ300 IT EN - REV006A
D
A
B
INSTALLATION
A
C
WARNING: on conclusion of assembly,
make sure that the propeller is exactly posi-
tioned at the central point of the tunnel.
EN
E
F
G
21