Table of Contents
Advertisement
Available languages
Available languages
INSTALLATION
EN
GEARLEG AND MOTOR SUPPORT FLANGE
SINGOL PROPELLER
• Proceed with fitting the gearleg with the special seal gasket.
• For further protection against the entry of water, apply silicone for nautical use around the point of contact between flange and
tube.
• Fasten everything to the flange using the special screws and washers.
• Grease the terminal part of the gearleg shaft; fit the small
key into its seat.
• Grease the terminal part of the gearleg shaft; fit the small
key into its seat.
20
DOUBLE PROPELLER
• Insert the elastic joint in the terminal part of the gearleg
shaft.
• Insert the motor onto the elastic joint; fasten it with the 4
screws and washers provided.
BOW THRUSTER BTQ140 - BTQ185 IT EN - REV006B
Hide quick links:
Advertisement
Table of Contents
