Table of Contents
Advertisement
OPERATING THE COMPUTER
USING YOUR COMPUTER
The computer can be activated by pressing the buttons or by pedaling.
If you leave the equipment idle for 4 minutes, the power will turn off
automatically.
BUTTON FUNCTIONS:
MODE: Press the MODE button to select each function of the
computer.
Press and hold the MODE button for 4 seconds to reset all data
values to zero except the ODO (ODOMETER) data values.
COMPUTER FUNTIONS:
SCAN: Press the MODE button until the arrow points to SCAN, the computer will
automatically scans each function in sequence with change every 5 seconds.
NOTE: If you do not want to use the SCAN function, press the MODE button to select one of
the other functions.
TIME: Press the MODE button until the arrow points to TIME, the computer will display your
elapsed workout time in minutes and seconds.
SPEED: Press the MODE button until the arrow points to SPEED, the computer will display
the current training speed.
CAL (CALORIES): Press the MODE button until the arrow points to CAL, the computer will
display the total accumulated calories burned during workout.
PULSE: Press the MODE button until the arrow points to PULSE and then hold both two
hands on handlebar grip sensors, the screen will display your current heart rate figures and
a heart symbol. To ensure the pulse readout is more precise, please always hold on to the
handlebar grip sensors with two hands instead of just with one hand only when you try to test
your heart rate figures.
DIST (DISTANCE): Press the MODE button until the arrow points to DIST, the computer will
display the accumulative distance traveled during workout.
ODO (ODOMETER): Press the MODE button until the arrow points to ODO, the computer
will display the total accumulative distance.
HOW TO INSTALL THE BATTERIES:
1.
Remove the battery cover on the back of the computer.
2.
Place two size AA batteries into the battery housing.
3.
Insure batteries are correctly positioned and battery springs are in proper contact with
batteries.
4.
Re-install the battery cover.
5.
If the display is illegible or only partial segment appears, remove batteries and wait 15
seconds before reinstalling.
13
Advertisement
Table of Contents
