Stowing The Crossbars - Chrysler pacifica hybrid 2017 Owner's Manual

148 GETTING TO KNOW YOUR VEHICLE
Installing Crossbars
5. Deploy and tighten the second crossbar to complete the
deployment of the crossbars.
NOTE: The crossbars are not identical and have fixed
deployment positions. Rear crossbar can be deployed in
two different positions.

Stowing The Crossbars

1. Starting with one crossbar, completely loosen the thumb
screws at both ends. Lift the crossbar away from the
matching letter to remove it from the deployed position.
Repeat with the other crossbar.
CAUTION!
Use care when removing and handling the crossbars to
prevent damage to the vehicle.
2. Starting with the one crossbar, bend up the pivot
supports at each end.