Chrysler pacifica hybrid 2017 Owner's Manual page 399

Front Fog Lamp — Halogen
1. Remove fasteners from inner wheel liner and carefully
peel back liner for access.
2. Reach through the front fascia to fog lamp housing to
access the bulb.
3. Rotate the front fog lamp socket counterclockwise, and
remove the bulb and socket assembly from the front fog
lamp housing.
Front Fog Lamp Socket
4. Pull the bulb out of the socket and insert the replace-
ment bulb.
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.
5. Install the front fog lamp socket assembly into the into
the front fog lamp housing, and rotate the connector
clockwise to lock it in place.
6. Position the inner wheel liner in place and install
fasteners.
Rear Liftgate Mounted Back-Up Lamps And Tail
Lamps (If Bulb Equipped)
1. Raise the liftgate.
2. Use a fiber stick or flat blade screw driver to pry off the
bulb access cover on the lower liftgate trim.
3. Back-up lamps/tail lamp (if bulb equipped) are now
visible. Rotate socket(s) counter clockwise.
4. Remove/replace bulb(s).
5. Reinstall the socket(s)
6. Reverse process to reinstall the liftgate trim.
IN CASE OF EMERGENCY 397
7