Chrysler pacifica hybrid 2017 Owner's Manual page 44

42 GETTING TO KNOW YOUR VEHICLE
Emergency Key Removal
2. Insert a coin, a flat blade screw driver, or the tip of your
emergency key into the now exposed slot and carefully
pry on both sides to disengage the snaps. Gently remove
the back cover from the fob being careful not to damage
any of the snaps.
Separating The Key Fob Case
3. Remove the battery by sliding the battery rearward in its
pocket until the battery lifts up. Remove the depleted
battery from the battery pocket and dispose appropri-
ately.
4. Fit a new CR2032 battery ensuring that the positive (+)
side is facing upwards. Push the battery into the pocket
until it is firmly seated in place and secured under both
tabs.
5. Align the back cover into its original position and snap
it back in place by pushing it against the fob until it is
seated all around.