Accessing The System From The Uconnect Theater Rear Screens - Chrysler pacifica hybrid 2017 Owner's Manual

538 MULTIMEDIA
Press this button and use the "Listen In" feature to listen to
audio through cabin speakers.
Accessing The System From The Uconnect
Theater Rear Screens
You can also access your Uconnect Theater system from the
rear screens from the steps below:
1. Lift screen upward, the system will automatically power
on.
NOTE: A message asking if you would like to pair a
remote will pop up if one has not already been paired to
the system.
2. If "YES" is selected to Pair a Remote, press any button
on the remote and pairing will immediately start.
3. If "NO" is selected, the Uconnect Theater home screen
will pop up.
NOTE:
• There will be a touchscreen notification message when
pairing is successful. Refer to "Pairing The Remote" on
the full procedure of how to pair the remotes.
• Test to make sure the remote is successfully paired by
dragging your finger across the gesture pad. If you do
not see the on screen arrow, try using the "Screen"
button to switch between screen one and screen two to
make sure the remote is controlling the intended screen.
It may take several seconds for the remote to react when
initially paired.
• If remote is ever non-operational, try performing the
pairing process again.