Chrysler pacifica hybrid 2017 Owner's Manual page 512

510 MULTIMEDIA
NOTE:
• Only one touchscreen area may be selected at a time.
• Depending on the vehicles options, feature settings may
vary.
When making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired mode,
press and release the preferred setting "option" until a
check-mark appears next to the setting, showing that setting
has been selected. Once the setting is complete, either press
the Back Arrow button on the touchscreen to return to the
previous menu, or press the "X" button on the touchscreen to
close out of the settings screen. Pressing the Up or Down
Setting Name
Forward Collision Sensi-
tivity
Forward Collision Warn-
ing Active Braking
NOTE:
When the "Forward Collision Warning Active Braking" feature is selected, the ABA applies additional brake pressure
when the driver requests insufficient brake pressure to avoid a potential frontal collision. The ABA system becomes
active at 5 mph (8 km/h).
ParkSense — If Equipped
Arrow button on the right side of the screen will allow you
to toggle up or down through the available settings.
KeySense
The vehicle's KeySense settings are protected by a unique
4-digit PIN, which the vehicle owner creates when access-
ing the specific settings for the first time. This 4-digit PIN
can only be reset by an authorized dealer.
After pressing the "KeySense" button on the touchscreen,
and entering the KeySense PIN, the following settings will
be available:
Near
Sound Only
Selectable Options
Medium
Sound and Display
Far