Tuning; Tuning Items List - Toyota 7FBEF 15 Service Manual

I Tuning
General
This function performs fine adjustment of traveling and material handling controls.
When the use requests to limit the maximum speed or weaken the regenerative braking force, each setting
can be performed on the TUNING screen in the procedures same as power control level setting.
59 tuning items are prepared including spares.

Tuning items list

Tuning

No.
Switchback regenerative breaking torque:
1 Changes the regenerative braking torque at
switchback.
Acceleration OFF regenerative breaking torque:
2
Changes regenerative breaking torque when
acceleration is OFF.
Battery warning setting level:
Changes the activation timings of low remaining
3
battery charge warning and battery
overdischarge warning. (See page 5-50.)
Battery charge indicator correction:
4
Corrects decreasing rate of battery charge
indicator.
Traveling speed limiter:
5
Adjust the maximum traveling speed.
Attachment power control No.1:
6 Changes the pump motor output for when
attachment switch No.1 is ON.
Tilt power control:
Changes the pump motor output for when
7
the tilt switch is ON.
(The SAS function mast control speed is not limited.)
Attachment power control No.2:
8 Changes the pump motor output for when
attachment switch No.2 is ON.
Auto-off function activation time:
9
Sets the time for activating auto-off function.
10 Spare
11 Spare
12
Spare
*1: 4-way mini lever models (OPT)
Item
*1
Level ( : Initial setting position)
1 2 3 4
Weak
Weak
Fast
Slow
decrease
Low
speed
Low
speed
Low
speed
Low
speed
Short
5-45
5 6 7 8
Strong
Strong
Slow
Disabled
Fast
decrease
High
speed
None
High
speed
High
speed
High
speed
Long
None