Table of Contents
Advertisement
(5) Battery charge indicator
This indicator indicates the remaining battery charge in 10 stages.
A: Low remaining battery charge warning
The battery charge indicator blinks when the remaining battery charge drops to the set level or below.
When the key switch is turned from OFF to ON in this state, a buzzer sounds for 5 seconds to warn the
operator.
B: Battery overdischarge warning (lift interrupt function)
When the battery charge decreases further below the set level after the remaining battery charge
warning, any attempt at traveling or material handling operation will cause all charge indicator
segments to blink and the alarm to sound to warn the operator. In this case, material handling during
traveling cannot be performed.
Note:
The level can be set using TUNING function of the mask function. (See page 5-45.)
Low remaining battery charge warning
3 0 /
9
A M
Number of segments corresponding to
the remaining battery charge.
(6) Power select Indicator (traveling and material handling)
A box enclosing S, P or H indicates the mode selected at present. The setting can be changed by
pressing the power select button on the GENERAL screen.
If all symbols are enclosed, control is performed in the original mode (level set on the POWER
CONTROL LEVEL SETTING screen).
(7) Multiple display area
The date and time are normally displayed in this area. This area is also used for various function
settings and error code displays of the diagnosis function.
(8) 2-speed travel speed control
Press this button on the GENERAL screen to set the 2-speed travel speed on and off.
(9) Hour meter selector button
This button changes displayed items of multi-hour meter function. The built-in function is different on
the easy model (standard vehicle) and the all-round model (OPT). (See page 5-9.)
(10) Power select button
The button selects S, P or H mode. The selected mode can be changed each time the power select
button is pressed on the GENERAL screen.
Press the button and hold it for 2 seconds to set the level of each function.
1 1
0 0
:
S P H
S P H
MENU
Battery overdischarge warning
3 0 /
9
A M
1 1
0 0
:
S P H
All battery charge indicator segments blink.
5-5
S P H
MENU
2
3
5
Hide quick links:
Advertisement
Table of Contents
