Display Indication List - Toyota 7FBEF 15 Service Manual

I Display indication list
GENERAL screen
To be selected by the user
2-speed travel speed ON/OFF
Switching to hour meter display
Power select
To be set by the user
Traveling speed level
Speed alarm
Power control select
Clock set
MASK FUNCTION screen
To be set by dealer or serviceman
ANALYZER
TUNING
OPTION SET
MATCHING
WHEEL DIA
DIAG MEMORY Checking past diagnosis error codes stored in memory
I/O MONITOR1 Checking the temperature and voltage of each functional part
I/O MONITOR2 Checking traveling-related sensors
I/O MONITOR3 Checking material handling and mast control sensors
I/O MONITOR4 Checking steering knob synchronizer and other sensors
ACTIVE TEST Forced ON/OFF test of each switch
TUNING1 Standard function adjustment
TUNING2 LIFTV Lift lever adjustment
TUNING3 TILTV Tilt lever adjustment
TUNING4 ATT1V ATT 1 lever adjustment
TUNING5 ATT2V ATT 2 lever adjustment
DEMO MODE Enabling simultaneous traveling and material handling before H/M start
H/M START Starting the hour meter count
P/C LOCK Power control lock selection
DESTI Changing display for each destination
B LEVEL
MPH Setting the traveling speed display
C/CNT RES
BATTERY Setting the calculation constant for battery charge indicator
SHOU-TOKU
SEAT P-OFF Setting the operation of the Auto-OFF function in relation to the seat switch
PARKING ERR Setting the parking brake OFF warning
TILT CONT Setting the mast forward tilt angle restriction
KNOB CONT
TILT F-LIM Setting the mast forward tilt/level function
B-TYPE Setting the battery type
36V
2-WAY VALVE Setting the specification of 2-way mini lever models
4-WAY VALVE Setting the specification of 4-way mini lever models
USA
WHEEL IND Setting the wheel indicator indication
SAS Setting the SAS function
FISHERMAN
TILTL Matching of the tilt/level angle
TILTF Matching of the tilt forward restricted angle
LOAD Matching of the NL load
TIRE Matching of the tire angle sensor forward direction
LIFT Matching of the lift lever neutral position
TILT Matching of the tilt lever neutral position
ATT1 Matching of the ATT1 lever neutral position
ATT2 Matching of the ATT2 lever neutral position
WHEEL DIA Setting the tire constant
ON or OFF setting of 2-speed travel speed
Checking traveling or material handling system operation time
Power mode selection
Setting of 2-speed travel speed level
Traveling speed setting for overspeed alarm
Fine adjustment of each of traveling and material handling power
control levels
Adjustment of indicated time
5-7