Mini Levers - Toyota 7FBEF 15 Service Manual

MINI LEVERS

I General
The electromagnetic oil control valves for mast control with mini levers are newly provided as options.
They are as follows:
• A check valve and an electromagnetic proportional valve are installed in the tilt circuit to control the mast
tilting operation.
• A check valve and an electromagnetic proportional valve are installed in the lift circuit for key-off lift
interlock to prevent the fork from lowering in case the down lift lever is touched erroneously while the
key is OFF.
• The check valves in the lift and tilt circuits greatly reduce natural drop and natural forward tilt.
I Appearance
Connection with actual machine components
Port P
(hydraulic fluid supply source)
Port T1
Port T2
Port C1
Pressure detection port
Port P static pressure detection
G1
G2
I Specifications
Relief pressure
Hydraulic pump
Tank
Tank
Lift cylinder bottom side
port
P
T1
G1
Lift
Tilt
Port C2 Tilt cylinder bottom side
Port C3 Tilt cylinder rod side
Port C4
Port C5
Pressure reducing valve static
G2
pressure detection port
C1
C3
C5
C2
C4
T2
Unit: MPa (kgf/cm
Mini rever
17.2 (175) [246]
−
9-9
Actuator
Actuator
2
) [psi]