Safety Functions; Anti-Rollback; Model Series; Maximum Battery Capacity - Toyota 7FBEF 15 Service Manual

1-8

6. Safety Functions

The new models are installed with the SAS safety functions adopted on the 7FB series to ensure
equivalent safety. Though the safety functions are summarized below, refer to the SAS Control
Equipment section for further details.
Safety Function List
Safety control
Active mast front tilt angle control
Active mast backward tilt speed control
Mast
con-
trol
Key-lift interlock
Automatic fork leveling control
Steering synchronizer (EHPS)
EHPS: ELECTRONICALLY CONTROLLED FULLY-HYDRAULIC POWER STEERING
On three-wheel battery counter vehicles, the automatic control rear stabilizer is not provided because
of no rear wheel swing mechanism.

7. Anti-rollback

A function for easy starting on a slope (reduction of rollback on a slope) is provided.

8. Model Series

The 1.6- and 2.0-ton models have been developed anew to enrich the model line-up.
The 1.0- and 1.25-ton models have been discontinued.
7FBE
5FBE
: Continuation

9. Maximum battery capacity

The battery compartment length in the longitudinal direction has been widened by 87 mm on the 1.5-
ton model and 193 mm on the 1.8-ton model to accept the same DIN-size batteries for the STILL R20
on all series models.
7FBE
5FBE
Capacity (kgf)
1000 1250 1500
: New
Capacity (kgf)
1500 1600
5PzS550L 6PzS660L
4PzS440L
Functional outline
Decreases the front tilt angle at a high fork height
or under a heavy load, and increases it at a low
fork height or under a low load.
Retards the backward tilting speed at a high fork
height, and increases it at a low fork height.
If the key switch is in the OFF position, the lift
operation is disabled even when the material han-
dling lever is operated.
Forward tilting by pressing the button causes the
mast to be stopped automatically when the fork is
leveled.
The steering knob is not shifted during full
hydraulic power steering.
1600 1800
1800 2000
6PzS660L 6PzS660L
4PzS440L
2000