Tire Constant Set; Operation Procedure For Tire Constant Setting; Tire Constant List - Toyota 7FBEF 15 Service Manual

5-62
I Tire constant set
General
In order to optimize the speed meter, tire constant that matches the tire outside diameter needs to be input
in the controller.
Although the tire constant is set on a new vehicle at shipment from the factory, adjust it whenever the tire
size is changed or the tires are worn excessively to a degree affecting the speedometer function.

Operation procedure for tire constant setting

1. Input the password on the general screen (see page
5-23) to display the MASK MENU screen.
2. Press button (2) four times to display "5. WHEEL DIA"
and press button (3) (enter) to display the tire constant
setting screen.
3. Press button (1) or (2) to set the desired tire constant
and press button (3) (enter) to display the MASK
MENU screen.
4. Functions of buttons on the tire constant setting
screen are as follows:
Button (1): Decreases the tire constant.
Button (2): Increases the tire constant.
Button (3): Enter and display MASK MENU screen

Tire constant list

Tire type
Pneumatic shaped
cushion
Pneumatic
Tire size
U lug
18 × 7-8
J lug
White 18 × 7-8
U lug
J lug 200/50-10
White
18 × 7-8-14
J lug
18 × 7-8-16
Button (1) Button (2)
MASK MENU screen
= M E N U =
5 . W H E E L D I A
S P H
W H E E L D I A
2 2
S P H
Tire constant
Applicable model
7FBEF15 ·16 ·18
7FBEF15 ·16 ·18
7FBEF20
7FBEF15
7FBEF16 ·18
S P H
MENU
Button (3)
Press button (3)
S P H
MENU
Tire constant
24
25
20