Operation Procedure For Option Set Screen - Toyota 7FBEF 15 Service Manual

5-56
Caution:
• These functions are used to adjust the controller
and display control according to the options
installed on the vehicle; they do not enable or
disable the actual function of the options.
• When the controller board is replaced, it is
necessary to reset it according to the vehicle
specifications.
• When OPT-12 TILT CONT and OPT-21 SAS are
disabled by option setting, the disabled status is
indicated for 5 seconds on the display upon key
switch ON.
Meaning of indication
T-OFF: TILT CONT (active mast front tilt angle
control) is disabled.
SAS-OFF: SAS (SAS control) is disabled.

Operation procedure for OPTION SET screen

1. Input the password on the GENERAL screen (see page 5-23) to display the MASK MENU screen.
2. Press button (2) twice to display "3. OPTION SET" and press button (3) (enter) to display the OPTION
SET MENU screen.
3. Press button (3) to display the desired option item to be set on the screen.
4. Functions of buttons on the OPTION SET screen are as follows:
Button (1): N → Y
Button (2): Y → N
Button (3): Enter (to the next item screen)
*: Press button (3) on OPT-22 OPTION SET screen to display the MASK MENU screen.
MASK MENU screen
= M E N U =
O P T I O N
3 . S E T
< >
O P T 1
D E M O M O D E
Button (1)
Button (2)
S P H
S P H
MENU
Button (3)
Press button (3)
Y / N
S P H
S P H
MENU
<
O P T
P / C L O C K
<
O P T
H / M S T A R T
Press
button (3)
OPT-2 (H/M START) hour meter starting method:
Press button
for 2 seconds or more.
T O F F A M 1 1 0 0
:
S P H
S P H
MENU
Indication when disable
30/ 9
A M 1 1 0 0
:
S A S O F F
S P H
S P H
MENU
OPT-4 screen
Press button (3)
>
3
Y / N
S P H
S P H
MENU
Press button (3)
>
2
Y / N
S P H
S P H
MENU
(2) while keeping button (1) pressed