Analyzer Menu Screen List - Toyota 7FBEF 15 Service Manual

5-26

Analyzer menu screen list

*Values shown in the 2nd column are display examples and not the standard values.
ANALYZER MENU
screen
1 DIAG MEMORY
I/O MONITOR1
2 (Voltage/
temperature)
I/O MONITOR2
3 (Traveling
system)
Display
1st column 2nd column
DIAG-1 to Error code and
DIAG-10 detection time
I/O 1-1 THCD: +25/+25
I/O 1-2 THCP: +25
I/O 1-3 TD: +25/+25
I/O 1-4 TP: +25
I/O 1-5 TBD: +25/+25
I/O 1-6 TBP: +25
I/O 1-7 TEMP: +25.0
I/O 1-8 VB48: 50.0
I/O 1-9 VBKS: 50.0
I/O 1-10 VBSOL: 50
I/O 1-11 VBMB: 50
I/O 1-12 VBBD: 50/50
I/O 1-13 VBBP: 50
POTA: 0.71
I/O 2-1
SWAC: 0
DSF: 0
I/O 2-2
DSR: 0
LSB: 1
I/O 2-3
LSD: 1
SSD1: 3000
I/O 2-4
[3000]
SSD2: 3000
I/O 2-5
[3000]
I/O 2-6 SPD: 10.0
Meaning
Error display
Main drive circuit 1 temperature (heat sink): °C
Main drive circuit 2 temperature (heat sink): °C
Main pump circuit temperature (heat sink): °C
Drive motor 1 temperature: °C
Drive motor 2 temperature: °C
Pump motor temperature: °C
Traveling AC driver 1 board temperature: °C
Traveling AC driver 2 board temperature: °C
material handling AC driver board tempera-
ture: °C
CPU board temperature: °C
Battery voltage: V
Key start voltage: V
Solenoid voltage: V
Voltage after MB contactor: V
Traveling AC driver 1 DC_BUS voltage: V
Traveling AC driver 2 DC_BUS voltage: V
Material handling AC driver DC_BUS voltage:
V
Accelerator potentiometer voltage: V
Acceleration switch: 0 (OFF), 1 (ON)
Forward switch: 0 (OFF), 1 (ON)
Reverse switch: 0 (OFF), 1 (ON)
Brake switch: 0 (OFF), 1 (ON)
Seat switch: 0 (OFF), 1 (ON)
Drove motor 1 rpm: rpm
[Main controller instruction rpm: rpm]
Drove motor 2 rpm: rpm
[Main controller instruction rpm: rpm]
Main traveling speed: mph or km/h