B710A01Y-EAT
Heating and Cooling Control (Not all models)
1
1. Side Ventilator
2. Centre Ventilator
3. Windscreen defrost Ventilator
CONTROLS AND EQUIPMENT
2
3
1
B710A01S-AAT
VENTILATION
To operate the ventilation system:
o Set the air intake control to "Fresh" mode
(
).
o To direct all intake air to the dashboard
vents, set the air flow control to "Face".
o Adjust the fan speed control to the desired
speed.
o Set the temperature control between "Cool"
and "Warm".
B710B01A-DAT
Centre Ventilator
The centre ventilators are located in the middle
of the dashboard.
To change the direction of the air flow, turn
the control knob on the middle of the ventilator
as desired.
B710C01Y-AAT
Side Ventilator
The side vent knobs control the amount of
outside air entering the vehicle through the
side vents. These vents can also be closed,
so no air enters through the side vents. To
change the direction of the air flow, turn the
control knobs as desired.
HFC002-D
1- 55