Mist Wiper Operation
B350B02O-DAG
If a single wipe is desired in mist, push the
windscreen wiper and washer control lever
upwards.
B350C01FC-DAT
Adjustable Intermittent Wiper
Operation
B350C01O-DAG
1- 40
CONTROLS AND EQUIPMENT
To use the intermittent wiper feature, place
the wiper switch in the "INT" position. With the
switch in this position, the interval between
wipes can be varied from approximately 1 to
18 seconds by turning the interval adjuster
barrel.
B350A01O-AAT
Tail Gate Wiper And Washer Switch
B350D01O-DAG
1.
: The washer fluid will be sprayed onto
the rear window and the wiper oper-
ates whilst the rear window wiper
barrel is placed in this position.
2.OFF
3.INT : To use the intermittent wiper feature,
place the rear window wiper barrel in
the "INT" position.
4.ON : When the point indicates "ON", the
rear window wiper operates continu-
ously.
SB240A1-E
HAZARD WARNING SYSTEM
HFC2078-D
The hazard warning system should be used
whenever it becomes necessary to stop the
car in a hazardous location. The hazard warn-
ing system is operated by depressing the
switch at which time all turn signal lights will
flash simultaneously and the turn signal warn-
ing lights located within the instrument cluster
will flash simultaneously.
The hazard warning system may be turned off
by depressing the switch again.