Table of Contents
Advertisement
1
FEATURES OF YOUR HYUNDAI
102
H260B03E-AAT
1. POWER ON-OFF Control
Knob
The radio unit may be operated when
the ignition key is in the "ACC" or "ON"
position. Press the knob to switch the
power on. The LCD shows the radio
frequency in the radio mode or the CD
track indicator in either the CD mode or
CD AUTO CHANGER mode. To switch
the power off, press the knob again.
VOLUME Control
Rotate the knob clockwise to increase
the volume and turn the knob counter-
clockwise to reduce the volume.
BALANCE Control
Pull and turn the control knob clockwise
to emphasize right speaker sound (left
speaker sound will be attenuated). When
the control knob is turned counterclock-
wise, left speaker sound will be empha-
sized (right speaker sound will be at-
tenuated).
2. FAD (Fader Control) Knob
Turn the control knob counterclockwise
to emphasize front speaker sound (rear
speaker sound will be attenuated). When
the control knob is turned clockwise,
rear speaker sound will be emphasized
(front speaker sound will be attenu-
ated).
3. BASS Control Knob
Press to pop the knob out and turn to
the left or right for the desired bass
tone.
TREB (Treble Control) Knob
Pull the bass control knob further out.
Turn to the left or right for the desired
treble tone.
4. SCAN Button
When the scan button is pressed, the
frequency will increase and the receiv-
able stations will be tuned in one after
another, receiving each station for 5
seconds. To stop scanning, press the
scan button again.
5. TUNE (Manual) Select Button
Press the ( ) side or ( ) side to increase
or to decrease the frequency. Press
either button and hold down to continu-
ously scroll. Release button once the
desired station is reached.
SEEK Operation
(Automatic Channel Selection)
Press the TUNE select button for 0.5
sec or more. Releasing it will automati-
cally tune to the next available station
with a beep sound.
When the (
) side is pressed longer
than 0.5 second and releasing will
automatically tune to the next higher
frequency and when the ( ) side is
pressed longer than 0.5 second, re-
leasing will automatically tune the next
lower frequency.
6. BAND Selector
Pressing the
button changes the
FM/AM
AM, FM1 and FM2 bands. The mode
selected is displayed on LCD.
Advertisement
Table of Contents
