Hyundai Matrix Owner's Manual page 269

Hide thumbs Also See for Matrix:
Table of Contents

Advertisement

B260D03O-AAT
1. Playing CD
o Insert the CD with the label facing
upward.
o Insert the CD to start CD playback,
during radio operation.
o When a disc is in the CD deck, if you
press the CD button, the CD player
will begin playing even if the radio is
being used.
o The CD player can be used when the
ignition switch is in either the "ON" or
"ACC" position.
2. FF/REW (
/
)
If you want to fast forward or reverse
through the compact disc track, push
and hold in the FF (
) or REW (
button.
When you release the button, the com-
pact disc player will resume playing.
3. TRACK UP/DOWN
o The desired track on the disc cur-
rently being played can be selected
using the track number.
o Press
once to skip forward to the
beginning of the next track.
Press
once to skip back to the
beginning of the track.
4. SCAN Button
o Press the SCAN button to playback
the first 10 seconds of each track.
o Press the SCAN button again within
10 sec. When you have reached the
desired track.
5. REPEAT Button
)
o To repeat the track you are currently
listening to, press the RPT button.
To cancel , press again.
o If you do not release RPT operation
when the track ends, it will automati-
cally be replayed.
This process will be continued until
you push the button again.
FEATURES OF YOUR HYUNDAI
6. EJECT Button
When the EJECT button
is pressed
with a CD loaded, the CD will eject.
NOTE:
o If the CD does not operate prop-
erly or if the ER2 fault code is
displayed, use one of two meth-
ods to reset the CD deck function.
- Remove the audio fuse for 5
minutes. Then, reinstall the
audio fuse.
- Disconnect the negative termi-
nal of the battery and wait 5
minutes. Then reconnect the
negative battery terminal.
o When replacing the fuse, replace
it with a fuse having the correct
capacity.
o The preset station frequencies are
all erased when the car battery is
disconnected. Therefore, all data
will have to be set again if this
should occur.
o Do not add any oil to the rotating
parts. Keep magnets, screwdriv-
ers and other metallic objects away
from the tape mechanism and head.
1
105

Advertisement

Table of Contents
loading

This manual is also suitable for:

Matrix 2005

Table of Contents