Table of Contents
Advertisement
1
FEATURES OF YOUR HYUNDAI
26
B220A01A-AAT
SEAT BELTS
2-Point Static Type
(Rear Seat Center) (If Installed)
To Fasten Your Seat Belt
HFC2085
To fasten a 2-point static type belt,
insert the metal tab into the locking
buckle. There will be an audible "click"
when the tab locks into the buckle.
Check to make sure the belt is properly
locked and that the belt is not twisted.
B220B01A-AAT
Adjusting Your Seat Belt
Too
high
Correct
Shorten
HTB226
With a 2-point static type seat belt, the
length must be adjusted manually so it
fits snugly around your body. Fasten
the belt and pull on the loose end to
tighten. The belt should be placed as
low as possible on your hips, not on
your waist. If the belt is too high, it
could increase the possibility of your
being injured in an accident.
B220C01A-AAT
To Release the Seat Belt
B220C01FC
When you want to release the seat
belt, press the button in the locking
buckle.
!
WARNING:
The center lap belt latching mecha-
nism is different from those for the
rear seat shoulder belts. When fas-
tening the rear seat shoulder belts
or the center lap belt, make sure
they are inserted into the correct
buckles to obtain maximum protec-
tion from the seat belt system and
assure proper operation.
Advertisement
Table of Contents
