Table of Contents
Advertisement
B340G01FC-EAT
HEADLIGHT LEVELING DEVICE
SYSTEM
B340G01FC-1
To adjust the headlight beam level according
to the number of the passengers and the
loading weight in the luggage area, turn the
beam leveling switch.
The higher the number of the switch position,
the lower the headlight beam level. Always
keep the headlight beam at the proper level-
ing position, or headlights may dazzle other
road users.
Listed below are the examples of recom-
mended switch settings. For loading condi-
tions other than those listed below, adjust the
switch position so that the beam level may be
the nearest as the condition obtained accord-
ing to the list.
1- 44
CONTROLS AND EQUIPMENT
Switch
Loading Condition
Position
Driver only
Driver + front passenger
Full passengers (including
driver)
Full passengers (including
driver) + Maximum permissible
loading
Driver + Maximum permissible
loading
SB330A2-E
SUNROOF (Not all models)
B470A01FC
The electrically operated sunroof may be
used only whilst the ignition switch is at the
"ON" position. The sunroof is equipped with a
sunshade which may be used whilst the
sunroof is at the closed position to obscure
incoming light.
0
The sunshade is automatically opened when-
ever the sunroof is opened but must be man-
0
ually closed by sliding forward after the sunroof
is closed.
When the sunroof is opened, the wind deflec-
1
tor will automatically rise to the upper position
and will automatically retract when the sunroof
is closed.
2
WARNING:
Never install or remove the sunshade
whilst driving.
3
To open the sunroof, depress and hold the
button indicated. The button should be re-
leased when the sunroof is at the fully open
position. The sunroof may be closed by de-
pressing and holding the button indicated. The
button should be released when the sunroof
is at the fully closed position.
HFC2021
Advertisement
Table of Contents
