Table of Contents
Advertisement
SB070C1-E
Front Seat Recline Adjustment
HFC2025-D
The front seat back recline angle may be
adjusted by leaning forward slightly and rais-
ing the recline adjustment lever at the side of
the seat. When the seatback is at the desired
angle, the lever should be released. Ensure
that the seatback is locked before driving the
vehicle.
CONTROLS AND EQUIPMENT
SB070D3-E
Head Restraint Adjustment
Lock knob
To raise the head restraint, pull it up. To lower
it, push it down whilst pressing the lock knob.
For maximum effectiveness in the event of an
accident, the restraint must be adjusted so
that the restraint is approximately at the level
of the seat occupant's eyes. The restraint
must never be so adjusted that it is centred
about the level of the seat occupant's neck.
WARNING:
o For maximum effectiveness in case of
an accident the head restraint should
be adjusted so the middle of the head
restraint is at the same height as the
top of the occupant's eyes. For this
reason, the use of a cushion that holds
the body away from the seatback
should not be recommended.
o Do not operate vehicle with the head
restraints removed as injury to the oc-
cupants may occur in the event of an
accident. Head restraints may provide
protection against neck injuries when
properly adjusted.
o Do not adjust the head restraint height
whilst the vehicle is in motion.
SB070E1-E
Lumbar Support Adjustment
HFC2028-D
(Not all models) (Driver's seat only)
Some models are fitted with adjustable driver
seat lumbar support which may be used to
increase the amount of lumbar support of-
fered by the seat back. Adjustment is per-
formed by moving the handle at the side of the
backrest in a forward direction to increase the
support.
HFC2027-D
1- 9
Advertisement
Table of Contents
