Table of Contents
Advertisement
B070C01FC-EAT
Alarm Stage
The alarm will be activated
if any of the
following occurs whilst the car is parked and
the system is armed.
1) A front or rear door is opened without using
the transmitter.
2) The tail gate is opened without using the
transmitter.
3) The engine bonnet is opened.
The alarming horn will sound and the turn
signal lights will blink continuously for 27
seconds. To turn off the system, unlock the
door or tail gate with the transmitter.
B070D02O-AAT
Disarmed Stage
1- 6
CONTROLS AND EQUIPMENT
The system will be disarmed when the driver's
or passenger's door is unlocked by depress-
ing the "UNLOCK" button on the transmitter.
After completion of the step above, the turn
signal light will blink twice to indicate that the
system is disarmed.
NOTE:
Once the system has been disarmed, it can
not be rearmed except by repeating the
arming procedures.
CAUTION:
Only the transmitter can disarm the armed
stage. If the transmitter does not disarm
the system, it is necessary to take the
following steps;
1. Unlock the door with the key, which will
cause, the alarm to be activated.
2. Insert the key in the ignition key cylin-
der and turn the ignition key to "ON"
position.
3. Wait for 30 seconds.
After completion of the steps above, the
system will be disarmed.
3A9BA21
B070F01A-EAT
Keyless Entry System (Not all models)
Locking doors
1. Close all doors.
2. Push the "LOCK" button on the transmit-
ter.
3. At the same time all doors lock, the turn
signal light will blink once to indicate that
the system is armed.
Unlocking doors
1. Push the "UNLOCK" button on the trans-
mitter.
2. At the same time all doors unlock, the turn
signal light will blink twice to indicate that
the system is disarmed.
B070E02HP-GAT
Replacing the battery
When the transmitter's battery begins to get
weak, it may take several pushes on the
button to lock or unlock the doors, and the
LED will not light. Replace the battery as soon
as possible.
Battery type : CR2032
Advertisement
Table of Contents
