Table of Contents
Advertisement
G050D02FC
6. Start the engine with the radiator cap still
removed and continue to add coolant as
the level decreases as air is expelled from
the system. When the level remains con-
stant, replace the radiator cap and replen-
ish the coolant reservoir.
7. When the engine is hot, check to ensure
that no coolant leaks are present.
WARNING:
The cooling fan is controlled by engine
coolant temperature and may sometimes
operate even when the engine is not run-
ning. Use extreme caution when working
near the blades of the cooling fan so that
you are not injured by a rotating fan
blade. As the engine coolant temperature
decreases, the fan will automatically shut
off. This is a normal condition.
OWNER MAINTENANCE
SG060A1-E
SPARKING PLUG REPLACEMENT
0.039 ~ 0.043 in. (1.0 ~ 1.1 mm)
This operation should only be performed when
the engine is cold.
1. Remove the centre cover from the engine
rocker cover.
2. Remove plug lead from the sparking plug to
be replaced, pulling the lead by the rubber
cap. (Pulling the lead may damage the car-
bon conductor).
3. Clean around the base of the plug to be
SSA6060A
removed, and install the plug socket ensur-
ing that the ceramic insulator does not be-
come damaged. Turn the socket counter-
clockwise to remove the plug.
CAUTION:
Sparking plugs must only be cleaned using
purpose designed equipment. Wire brush-
ing may damage the centre electrode in-
sulator causing misfiring to occur. Only
the correct grade of sparking plug should
be used. Use of an incorrect grade may
result in serious engine damage.
SSA6060B
6-11
Advertisement
Table of Contents
