Dodge RAM 1500 1998 Owner's Manual page 1804

DR
MANUAL TRANSMISSION - NV5600 (Continued)
(3) Remove output shaft pocket bearing race from
the input shaft with Puller L-4518 (Fig. 36).
Fig. 36 OUTPUT SHAFT POCKET BEARING RACE
1 - PULLER
2 - INPUT SHAFT
(4) Remove input shaft bearing and oil guide from
the input shaft with Collar 6444-8, Jaws 8243, Puller
Rods 6444-6 and the remainder of Puller 6444 (Fig.
37).
OUTPUT SHAFT
NOTE: Some gear and synchro components can be
installed backwards. Mark the gears, clutch gears,
synchro hubs, and sleeves for installation reference
during disassembly. Use paint or a scribe for mark-
ing purposes. Then stack the geartrain parts in
order of removal.
(1) Remove first gear from the output shaft.
(2) Remove first gear bearing from the output
shaft (Fig. 38).
MANUAL TRANSMISSION - NV5600
Fig. 37 INPUT SHAFT BEARING
1 - PULLER
2 - JAWS
Fig. 38 FIRST GEAR BEARING
1 - OUTPUT SHAFT
2 - FIRST GEAR BEARING
21 - 101