Dodge RAM 1500 1998 Owner's Manual page 2195

Table of Contents

Advertisement

21 - 492
TRANSFER CASE - NV243
TRANSFER CASE - NV243 (Continued)
(6) Remove the mode hub (Fig. 31) from the output
shaft.
Fig. 31 Remove Mode Hub
1 - OUTPUT SHAFT
2 - MODE HUB
INPUT AND PLANETARY GEAR
(1) Remove input gear seal with suitable screw
and slide hammer.
(2) Remove input gear retaining ring (Fig. 32) with
heavy duty snap-ring pliers.
Fig. 32 Remove Input Gear Retaining Ring
1 - INPUT GEAR
2 - RETAINING RING
(3) Place front case in horizontal position. Then
remove input gear and low range gear as an assem-
bly (Fig. 33). Tap gear out of bearing with plastic
mallet, if necessary.
Fig. 33 Remove Input Planetary Assembly
1 - FRONT CASE
2 - INPUT PLANETARY ASSEMBLY
INPUT AND PLANETARY GEAR
(1) Remove snap-ring that retains input gear in
low range gear (Fig. 34).
Fig. 34 Input Gear Snap-Ring Removal
1 - INPUT GEAR SNAP-RING
DR

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1997 ram 1500

Table of Contents