Dodge RAM 1500 1998 Owner's Manual page 2078

DR
INPUT CLUTCH ASSEMBLY (Continued)
(6) Remove the number 3 bearing from the under-
drive hub.
(7) Remove the OD/reverse reaction plate snap-
ring from the input clutch retainer.
(8) Remove the underdrive hub, overdrive clutch,
and overdrive reaction plate from the input clutch
retainer (Fig. 79).
NOTE: The overdrive friction discs and steel discs
are thicker than the matching components in the
underdrive and reverse clutches.
1 - BEARING NUMBER 3
2 - OD HUB/SHAFT
3 - SNAP-RING (WAVE)
4 - REV/OD REACTION PLATE
5 - BEARING NUMBER 4
6 - SNAP-RING (FLAT)
7 - REVERSE HUB/SHAFT
8 - REVERSE CLUTCH
9 - REVERSE REACTION PLATE
AUTOMATIC TRANSMISSION - 45RFE/545RFE
clutch hub.
from the input clutch retainer.
snap-ring from the input clutch retainer.
input clutch retainer.
ring from the input clutch retainer (Fig. 79).
input clutch retainer (Fig. 81).
Fig. 79 Input Clutch Assembly - Part 2
10 - SNAP-RING (SELECT)
11 - PLATE
12 - DISC
13 - OD CLUTCH
14 - SNAP-RING (TAPERED)
15 - UD/OD REACTION PLATE
16 - SNAP-RING (FLAT)
17 - UD HUB/SHAFT
18 - BEARING NUMBER 2
(9) Remove the number 2 bearing from the input
(10) Remove the overdrive clutch wave snap-ring
(11) Remove the UD/OD reaction plate tapered
(12) Remove the UD/OD reaction plate from the
(13) Remove the UD/OD reaction plate flat snap-
(14) Remove the underdrive clutch pack from the
21 - 375