Dodge RAM 1500 1998 Owner's Manual page 2032

DR
AUTOMATIC TRANSMISSION - 45RFE/545RFE (Continued)
(23) Install the snap-ring to hold the park sprag
onto the output shaft (Fig. 39).
Fig. 39 Install Park Sprag Snap-Ring
1 - SNAP-RING
(24) Install the 2C reaction plate into the trans-
mission case (Fig. 40).
(25) Install the 2C clutch pack into the transmis-
sion case (Fig. 40).
(26) Install the number 8 bearing inside the reac-
tion carrier with the outer race against the reaction
planetary carrier.
(27) Install the reaction planetary gear set and the
number 9 bearing, with the inner race against the
reaction planetary carrier, into the transmission case
(Fig. 41).
AUTOMATIC TRANSMISSION - 45RFE/545RFE
Fig. 40 Install 2C Clutch Pack
1 - SNAP-RING
2 - PLATE
3 - DISC
4 - REACTION PLATE
(28) Install the flat 2C clutch snap-ring into the
transmission case (Fig. 40).
(29) Install the reaction sun gear into the reaction
planetary gear set. Make sure the small shoulder is
facing the front of the transmission (Fig. 41).
(30) Install the number 7 bearing onto the reaction
sun gear with the inner race against the sun gear
(Fig. 41).
21 - 329