Dodge RAM 1500 1998 Owner's Manual page 1763

21 - 60 MANUAL TRANSMISSION - NV4500
MANUAL TRANSMISSION - NV4500 (Continued)
(18) Remove mainshaft rear bearing, with Puller
Flange 6444-1 and Puller Rods 6444-3 for 4X2 or
6444-4 for 4X4.
(19) Position the first Jaw 6445 on the bearing
cone and seat Puller Flange 6444-1 in notch of jaw
(Fig. 57).
(20) Install second Jaw 6445 on the bearing cone
and puller flange. Slide Collar 6444-8 over jaws to
hold them in place.
(21) Install Puller 6444 on the puller rods and
secure with nuts (Fig. 58). Tighten puller bolt to the
remove bearing.
1 - REAR BEARING
2 - FLANGE
3 - JAW
4 - COLLAR
Fig. 57 MAINSHAFT REAR BEARING PULLER
5 - MAINSHAFT
6 - PULLER
7 - RODS
8 - JAW
DR