Dodge RAM 1500 1998 Owner's Manual page 1693

19 - 38 LINKAGE - LINK/COIL
TRACK BAR
REMOVAL
(1) Raise and support the axle.
(2) Remove the track bar bolts and nuts (Fig. 8).
(3) Remove the track bar (Fig. 8).
Fig. 8 TRACK BAR REMOVAL/INSTALLATION
1 - TRACK BAR
2 - BOLT
3 - NUT
INSTALLATION
(1) Install the track bar.
(2) Install the new bolts and nuts. Tighten to 203
N·m (150 ft lbs.).
(3) Remove the supports under the axle and lower
the vehicle to the ground.
DR