Dodge RAM 1500 1998 Owner's Manual page 1724

DR
MANUAL TRANSMISSION - NV3500 (Continued)
(14) Press 1-2 synchro onto output shaft using
suitable size pipe and shop press (Fig. 62).
CAUTION: Keep synchro ring and sleeve aligned as
the hub is being pressed onto the shaft. The syn-
chro ring can be cracked if it becomes misaligned.
Fig. 62 1-2 SYNCHRO ON OUTPUT SHAFT
1 - PIPE TOOL
2 - SYNCHRO RING
3 - COLLAR
4 - 1-2 SYNCHRO ASSEMBLY
5 - PRESS RAM
(15) Install interm ring.
(16) Install new 1-2 synchro hub snap ring (Fig.
63). Verify snap ring is seated in shaft groove.
(17) Install second gear synchro ring in 1-2 syn-
chro hub and sleeve (Fig. 64). Verify synchro ring is
seated in sleeve.
(18) Install synchro friction cone and synchro cone
in synchro ring.
MANUAL TRANSMISSION - NV3500
Fig. 63 1-2 SYNCHRO HUB SNAP RING
1 - 1-2 SYNCHRO
2 - COLLAR
3 - SYNCHRO SNAP RING
Fig. 64 SECOND GEAR SYNCHRO RING
1 - SECOND GEAR SYNCHRO RING
2 - 1-2 SYNCHRO
3 - COLLAR
21 - 21