Dodge RAM 1500 1998 Owner's Manual page 1559

13 - 16 FRAMES & BUMPERS
FRAME (Continued)
SPECIFICATIONS - FRAME DIMENSIONS
NOTE: Frame dimensions are listed in metric scale.
All dimensions are from center to center of Princi-
pal Locating Point (PLP), or from center to center of
PLP and fastener location.
VEHICLE PREPARATION
Position the vehicle on a level work surface. Using
screw or bottle jacks, adjust the vehicle PLP heights
to the specified dimension above a level work surface.
Vertical dimensions can be taken from the work sur-
face to the locations indicated were applicable.
DESCRIPTION
Frame Dimensional Graphics, Side
And Top View
140.5 In Wheelbase - Heavy Duty -
2 Wheel Drive
140.5 In Wheelbase - Heavy Duty -
4 Wheel Drive
160.5 In Wheelbase - Heavy Duty -
2 Wheel Drive
160.5 In Wheelbase - Heavy Duty -
4 Wheel Drive
INDEX
FIGURE
23
24
25
26
27
DR