Dodge RAM 1500 1998 Owner's Manual page 1802

DR
MANUAL TRANSMISSION - NV5600 (Continued)
(10) Remove geartrain from the clutch housing and
install the geartrain into Support Stand 8246 (Fig.
30).
Fig. 30 GEARTRAIN FIXTURE
1 - FIXTURE
2 - SUPPORT STAND
(11) Remove Fixture 8232 from the output shaft
and the countershaft.
(12) Separate the countershaft from the output
shaft.
(13) Separate the output shaft from the input
shaft. Hold the 5-6 synchro together while removing
the output shaft to prevent the synchro sleeve from
being dislodged from the synchro hub.
COUNTERSHAFT BEARINGS
(1) Remove snap-ring holding the front counter-
shaft bearing onto the countershaft.
(2) Remove front countershaft bearing with Collar
6444-8, Jaws 6451, Puller Rods 6444-4 and Puller
6444 (Fig. 31).
(3) Remove rear countershaft bearing with Collar
6444-8, Jaws 6447, Puller Rods 6444-4, Puller 6444
and suitable press button (Fig. 32).
MANUAL TRANSMISSION - NV5600
Fig. 31 FRONT COUNTERSHAFT BEARING
1 - PULLER
2 - JAWS
Fig. 32 REAR COUNTERSHAFT BEARING
1 - PULLER
2 - JAWS
21 - 99