DR
FRONT MOUNT (Continued)
INSTALLATION
(1) With engine raised SLIGHTLY, position the
insulator to the mount (Fig. 102) (Fig. 103). Install
the bolts and torque to specification.
Fig. 102 LH Insulator
1 - Bolt
2 - Insulator
3 - Mount
(2) Lower the engine using tool # 8534, while guid-
ing the mount and thru-bolt into the frame mounted
support cushion brackets.
(3) Install the thru-bolt nut and tighten the nut to
95 N·m (70 ft. lbs.) torque.
ENGINE 5.9L DIESEL
Fig. 103 RH Insulator
1 - Mount
2 - Insulator
3 - Bolt
(4) Remove the engine support fixture tool #8534.
(5) Lower the vehicle.
(6) Install the viscous fan/drive assembly (Refer to
7 - COOLING/ENGINE/RADIATOR FAN - INSTAL-
LATION).
(7) Connect the battery negative cables.
9 - 287