Dodge RAM 1500 1998 Owner's Manual page 1831

21 - 128 MANUAL TRANSMISSION - NV5600
ADAPTER HOUSING SEAL
REMOVAL
(1) Raise and support vehicle.
(2) Mark propeller shaft and yokes for installation
reference and remove shaft.
(3) Remove the transfer case.
(4) Remove the adapter housing seal with a pry
tool or slide hammer with a screw.
INSTALLATION
(1) Install adapter housing seal with Installer and
Handle C-4171.
(2) Install transfer case.
(3) Install propeller shaft with reference marks
aligned.
(4) Check fluid level.
(5) Remove support and lower vehicle.
EXTENSION HOUSING SEAL
REMOVAL
(1) Mark propeller shaft and pinion yoke for
installation reference and remove the propeller shaft.
(2) Remove extension housing seal with a pry tool
or a slide hammer and screw.
(3) Remove extension
Remover 8155 (Fig. 97).
Fig. 97 EXTENSION HOUSING BUSHING REMOVAL
1 - REMOVER
housing bushing with
INSTALLATION
(1) Install extension
Installer 8156 and Handle C-4171 (Fig. 98).
Fig. 98 Install Extension Housing Bushing
1 - HANDLE
2 - INSTALLER
3 - BUSHING
(2) Install extension housing seal with Installer
8154 and Handle C-4171 (Fig. 99).
Fig. 99 EXTENSION HOUSING SEAL INSTALLER
1 - INSTALLER
2 - HANDLE
(3) Install propeller shaft with reference marks
aligned.
(4) Check and fill transmission.
DR
housing bushing with