Warranty; Disclaimer Of Warranty; List Of Trademarks; Standard Terms & Conditions Of Ximea Gmbh - XIMEA xiQ series Technical Manual

6.4.

Warranty

In addition to the provisions of Article VIII of the Standard Terms & Conditions of XIMEA GmbH (see 6.7 Standard Terms &
Conditions of XIMEA GmbH) the following additions and specifications apply:
XIMEA warrants to the Original Purchaser that the Camera provided is guaranteed to be free from material and manufacturing
defects for a period of two years. Should a unit fail during this period, XIMEA will, at its option, repair or replace the damaged
unit. Repaired or replaced Products are covered for the remainder of the original Product warranty period.
Please note our explanations regarding the usage and handling of board level cameras and related restrictions of warranty (see
6.3.11 Safety instructions for board level cameras).
Warranty is void if any proprietary labeling is removed. This warranty does not apply to units that, after being examined by XIMEA,
have been found to have failed due to customer abuse, mishandling, alteration, improper installation or negligence. If the original
camera module is housed within a case, removing the case for any purpose voids this warranty. This warranty does not apply to
damage to any part of the optical path resulting from removal or replacement of the protective glass or filter over the camera,
such as scratched glass or sensor damage. If the camera is disassembled, reworked or repaired by anyone other than a
recommended service person, XIMEA or its suppliers will take no responsibility for the subsequent performance or quality of the
camera.
XIMEA expressly disclaims and excludes all other warranties, express, implied and statutory, including, but without limitation,
warranty of merchantability and fitness for a particular application or purpose. In no event shall XIMEA be liable to the Original
Purchaser or any third party for direct, indirect, incidental, consequential, special or accidental damages, including without
limitation damages for business interruption, loss of profits, revenue, data or bodily injury or death except in case of willful
misconduct by XIMEA or employees of XIMEA.
6.5.

Disclaimer of Warranty

In addition to the provisions of Article XII of the Standard Terms & Conditions of XIMEA GmbH (see 6.7 Standard Terms &
Conditions of XIMEA GmbH) the following apply:
Although XIMEA has taken care to ensure the accuracy of the information contained herein it accepts no responsibility for the
consequences of any use thereof and also reserves the right to change the specification of goods without notice.
XIMEA does not assume any liability for damage that is the result of improper use of its products or failure to comply with the
operating manuals or the applicable rules and regulations.
6.6.

List Of Trademarks

XIMEA, xiQ, xiMU, xiCool, xiRAY, xiCe and CURRERA are trademarks or registered trademarks of XIMEA GmbH in Germany,
Slovakia, USA and other countries.
Microsoft, Windows, Windows8, Windows 7, Windows Vista, and Windows XP are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries. Apple, the Apple logo, Macintosh, MacOS, OS X, Bonjour, the
Bonjour logo and the Bonjour symbol are trademarks of Apple Computer, Inc. Linux is a trademark of Linus Torvalds. The USB3
Vision is trademark owned by the AIA.
All other brands, service provision brands and logos referred to are brands, service provision brands and logos belonging to their
respective owners.
6.7. Standard Terms & Conditions of XIMEA GmbH
General Conditions
for the Supply of Products and Services of the Electrical and Electronics Industry ("Grüne Lieferbedingungen" – GL)*
for commercial transactions between businesses
recommended by ZVEI-Zentralverband Elektrotechnik- und Elektronikindustrie e. V.
as of June 2011
xiQ - Technical Manual Version 1.0 97