Standard Conformity; Ce Conformity; For Customers In The Us: Fcc Conformity - XIMEA xiQ series Technical Manual

1.3.

Standard Conformity

The xiQ cameras have been tested using the following equipment:
• A shielded USB 3.0 cable ref. CBL-U3-3M0 (3m)
• A shielded I/O Sync cable ref. CBL-MQSYNC-3M0 (3m)
Warning: Changes or modifications to the product may render it ineligible for operation under CE, FCC or other jurisdictions.
XIMEA recommends using the above configuration to ensure compliance with the following standards:
1.3.1.

CE Conformity

The xiQ cameras described in this manual comply with the requirements of the
• EC EMC Directive 2004/108/EEC
electromagnetic compatibility of equipment
Used harmonized European standards and technical specifications:
• EN 55022:2006 + A2:2010)
Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement
• EN 55024:2010
Information technology equipment - Immunity characteristics - Limits and methods of measurement
• EN 61000-6-2:2005
• EN 61000-6-3:2007 + A1:2011
Generic standards – Emission standard for residential, commercial and light-industrial environments
• EN 61000-6-4:2007 + A1:2011
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
• EN 61000-4-2:2009
• EN 61000-4-3:2006 + A2:2010
Radiated, radio-frequency electromagnetic field immunity test
• EN 61000-4-4:2012
• EN 61000-4-6:2009
• EN 61000-6-1:2007
1.3.2.

For customers in the US: FCC Conformity

The xiQ cameras described in this manual have been tested and found to comply with Part 15 of the FCC rules, which states
that:
Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the users will be required to correct the interference at
their own expense.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate
this equipment under above jurisdictions. The shielded interface cable recommended in this manual must be used with this
equipment in order to comply with the limits for a computing device pursuant to Subpart J of Part 15 of FCC Rules.
xiQ - Technical Manual Version 1.0
Electromagnetic compatibility (EMC). Generic standards. Immunity for industrial environments
Electrostatic discharge immunity test
Electrical fast transient/burst immunity test
Immunity to conducted disturbances, induced by radio frequency fields
Generic standards – Immunity for residential, commercial and light-industrial environments
3