Xiapi Auto Bandwidth Calculation; Usb3 Vision; Genicam - XIMEA xiQ series Technical Manual

Usb 3.0 camera

Hide thumbs Also See for xiQ series:

Table of Contents

5.6.6.

xiAPI Auto Bandwidth Calculation

xiAPI uses Auto Bandwidth Calculation (ABC) before the opening of each camera by default. After the measurement,90% of the

measured value is used as the maximum allowed transfer speed of the camera to ensure the stability of transfer.

It is important to set this parameter to XI_OFF to ensure highest possible data transfer speed.

To disable ABC, the application should set parameter XI_PRM_AUTO_BANDWIDTH_CALCULATION to XI_OFF before the first

xiOpenDevice is used. This setting disabled ABC and the camera stream is not limited.

5.6.7.

For more information on programing according the USB3 VISION standard, please visit the standard's website at

http://www.visiononline.org/vision-standards-details.cfm?type=11

5.6.8.

For more information on programing according the GenICam standard, please visit the standard's website at

http://www.emva.org/cms/index.php?idcat=27

xiQ - Technical Manual Version 1.0

Table of Contents

Show Quick Links

Table of Contents