3.5.2.5.
Referenced documents
E2V Datasheet EV76C56 1005A–IMAGE–29/06/09
3.5.2.6.
Sensor features
feature
Binning
Skipping
ROI
HW Trigger
HDR
table 3-9, sensor features available
3.5.2.7.
Note: horizontal image lines (MQ013CG-E2, MQ013MG-E2)
Running the cameras in overlap mode (live mode) with exposure times between 300µs and 16ms may cause a horizontal line in
the image. This is a known issue of the used sensors and is caused by pixel readout or sensor reset during acquisition.
3.5.2.8.
Note: triggered exposure
The feature triggered exposure is not supported by the sensors.
3.5.2.9.
Frame rate examples
Following table lists examples for the maximum frame rate - Frames Per Second (FPS) that can be achieved with active region of
interest (ROI), free run mode (no trigger), RAW8 data format, exposure time 200µs.
Tested with: Intel i7-3770, 4GB DDR3, GA-Z77M-D3H, Windows 7 x64, API_INST_V3_19_06. Measured without further data
processing.
Camera model
USB3-Controller
MQ013MG-E2
Intel Z77
MQ013MG-E2
Fresco Logic FL1009
Table 3-10, MQ013MG-E2, frame rate examples with ROI
xiQ - Technical Manual Version 1.0
Note
Yes, 2x2 binning supported
Not supported yet
1 ROI with free parameters supported
Trigger without overlap usable (see 4.3.2.3 Triggered mode without overlap)
Currently not supported
FPS
ROI
2100
1280 x 12
860
1280 x 56
25