Table of Contents
Advertisement
5.3.3.2.
New CCD Test
newCCDtest is a legacy viewer application, based on the m3Api. Please note that not all new functions are available in this viewer
because new functions are developed in xiAPI.
Usage:
•
Run newCCDtest_mm.exe (newCCDtest_mmX64.exe for 64 Bit systems) located in C:\XIMEA\Utilities
•
Select Acquistion – Run to start the image acquisition and display, or use the green Play Button.
•
Select Acquisiton – Setup to open the settings window
•
Value fields can be manipulated by their adjacent sliders or by using the mouse wheel (up-down) while a field is selected.
Holding SHIFT or CTRL while using the mouse wheel will increase the increment of the value change (+-10, +-100).
•
Select Configuration – GPIO open the GPIO settings window
•
Note: newCCDtest does not measure the available bandwidth for connected xiQ camera automatically.
If a USB host controller is used that cannot deliver a sufficient bandwidth, it is necessary to limit the bandwidth manually.
To do so, before starting the acquisition, open Configuration – Bus Speed, press Start/Stop to initiate the bandwidth
measure and press Set to apply the measure value as bandwidth limit.
figure 5-7, Windows - newCCDtest
5.4.
Linux Software Package
XIMEA Linux Software Package is tarred installer with files that can be run on Linux Ubuntu 12.04 (32 and 64 Bit) and newer
releases.
5.4.1.
Contents
The package contains:
•
Driver (beta version) for XIMEA USB2 and USB3 cameras
xiQ - Technical Manual Version 1.0
81
- Quick Links:
- Mq013Xg-E2
Hide quick links:
Advertisement
Table of Contents
