Xiq Usb 3.0 Interface; Location; Pinning - XIMEA xiQ series Technical Manual

3.7.

xiQ USB 3.0 Interface

Connector Signals
USB 3.0 Standard USB 3.0 Micro-B Female Connector
table 3-19, USB 3.0 mating connector description
The USB 3.0 Micro-B connector is used for data transmission, camera control and power.
3.7.1.

Location

The USB 3.0 connector is located on the back side of the camera:
Isol ated I/O 24V 20mA max.
USB 3.0
figure 3-25, position USB 3.0 interface
3.7.2.

Pinning

1 2 3 4 5
USB 3.0 Micro B connector
figure 3-26, pinning USB 3.0 connector
USB 3.0 Micro B connector (powered) Pin Assignment
Pin Signal
1 VBUS
2 D-
3 D+
4 ID
5 GND
6 MicB_SSTX-
7 MicB_SSTX+
8 GND_DRAIN
9 MicB_SSRX-
10 MicB_SSRX+
table 3-20, USB 3.0 connector, pin assignment
The USB 3.0 standard is backward compatible with the USB 2.0 interface.
xiQ - Technical Manual Version 1.0
32301551
PN: MQ013CG-CM
STATUS 1
STATUS 2
POWER
USB 3.0 SuperSpeed
Based on the USB-IF's USB 3.0 specific ation.
5V
(<1.5W)
For use with XIMEAapproved connection cables onl y.
6 7 8 9 10
Description
Power
USB 2.0 signal pair
OTG Identification
Power Ground
USB 3.0 SuperSpeed transmitter signal pair
USB 3.0 signal Ground
USB 3.0 SuperSpeed receiver signal pair
Mating Connectors
Standard USB 3.0 Micro-B Connector with thumbscrews
Screw thread M2, thread distance 18.0mm
38