Mechanical Drawings (Cs-Mount [Without C/Cs Mount Module B]); Camera Orientation; Referenced Documents; Sensor Features - XIMEA xiQ series Technical Manual

3.5.3.4.

Mechanical drawings (CS-mount [without C/CS mount module B])

figure 3-14, mechanical drawing MQ013xG-ON, CS-Mount housing
3.5.3.5.

Camera orientation

Please note that the camera orientation of the MQ013xG-ON models are different. The USB 3.0 connector is at the upper side of
the camera. Please see the next figure:
For use with XIMEAapproved connection cables onl y.
5V
(<1.5W)
USB 3.0 SuperSpeed
Based on the USB-IF 's USB 3.0 specific ation.
POWER
INPUT
STATUS 2
Isol ated I/O 24V 20mA max.
STATUS 1
PN: MQ013MG-ON
13200250
Figure 3-15, MQ013xG-ON, camera orientation
3.5.3.6.

Referenced documents

Onsemi Datasheet VITA1300-datasheet-Rev. 8 (July 2012)
3.5.3.7.

Sensor features

feature
Binning
Skipping
ROI
HW Trigger
HDR
table 3-12, sensor features available
xiQ - Technical Manual Version 1.0
Note
Not implemented
Yes, 2x2 binning supported
1 ROI with free parameters supported
(x coordinates multiple of 16, y coordinates multiple of 2)
Trigger with overlap usable (see 4.3.2.4 Triggered mode with overlap)
Knee point based HDR (beta stage), see 4.4.9 HDR – Not implemented, yet
28