Periodic Maintenance; Warning Light - Ikco SAMAND Owner's Manual

DIGITAL DISPLAY SCREEN GUIDE*
3
Digital display screen guide*
1-When the ignition switch is
turned to "ON" the display
shows odometer.
records the total distance (km) the vehicle
has been driven since being delivered to
the owner. The trip meter could not be reset
to zero (if it has been set on this situation,
otherwise it could be observed when the
ignition switch is in "OFF" position).
2-Trip meter
distance (km) the vehicle has
been driven since it has been
reset to zero. Push reset button for 2
second to reset the distance to zero.
* If equipped
86
3-This indicates the pressure
of the gas in the LCD and is
made of 6 black stripes. When
gas pressure is full the 6 stripes are active
and by decreasing the gas pressure the
number of these stripes decreases. Gas
tank insufficient pressure warning is
indicated by the flashing of the first stripes
in LCD. When the gas pressure become
zero the last stripes goes off.*
Clock, Date, Outside
temprature
Odometer Clock could be set from 0:00 to
23:59 with one minute accuracy.
Calendar could be set from 1380 to 1499
with one day accuracy. Leap years are
not anticipated in the calendar.
Temprature display limit is from -40 to +80°C
Average speed
indicates the This is the average speed
calculated since the computer
was last set to zero. This could be reset to
zero by pushing the reset button.
Intensity of the Instrument
Panel illumination
Small lamps illuminate
instrument Panel. (You can adjust the intensity
of the instrument Panel by rotary button.)

Periodic maintenance

Push the left button (rotary button)
for 1 second to set the kilometer
figure for changing engine oil, oil filter and
air filter of the vehicle. After one minute
you will see the adjusting menu. Select the
pertinent option by turning the button and
then hold the button for 2 second in order
the pre-determined figures to be displayed.
Select the intended figure by turning the
rotary button. Maintenance kilometer figure
will be the difference of the kilometer at time
of setting and the traveled distance after
setting, which has 1 kilometer accuracy.
Maintenance light comes on when it is due
for maintenance.
Vehicle's main lamps fault

warning light

This warning light comes on
display when there is a fault with one of
the front or rear lamps.
the