1. Manuals
  2. Brands
  3. Ikco Manuals
  4. Automobile
  5. Pickup
  6. Owner's manual

Ikco Pickup Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
iraN kHodro industrial Group
KM.14 Karaj Road.,Tehran,Iran
P.O.Box:13895-111
Tel: (+9821) 48901
Fax: (+9821) 44934000-1
SMS Centre: (+98)30003
E-mail: info@ikco.com
www.ikco.com
pickup
pickup
bi-fuel pickup
bi-fuel bardo pickup
owner's Manual
This Manual has been prepared for owner's reference to vehicle's
performance, safety, maintenance and everyday use guidelines.
Keeping the manual in your car is recommended for quick reference.

Advertisement

Table of Contents
loading

Related Manuals for Ikco Pickup

Summary of Contents for Ikco Pickup

  • Page 1 Group owner’s Manual KM.14 Karaj Road.,Tehran,Iran P.O.Box:13895-111 Tel: (+9821) 48901 Fax: (+9821) 44934000-1 This Manual has been prepared for owner’s reference to vehicle’s SMS Centre: (+98)30003 performance, safety, maintenance and everyday use guidelines.
  • Page 2 In The Name of God PICKUP BI-FUEL PICKUP & BI-FUEL BARDO PICKUP OWNER’S MANUAL...
  • Page 3 For any more information, you can consult with IRAN KHODRO dealers. Information about other varieties of this product have been mentioned in this manual and denoted by asterisk (*). - Consumptive matterial must be provided through authorized agents of IKCO. (Use the brands and packages approved and offered by ISACO.)
  • Page 4 INDEX PICKUP AT A GLANCE BEFORE DRIVING DRIVING MAINTENANCE TECHNICAL EMERGENCIES TECHNICAL DATA INDEX...
  • Page 5 OVERVIEW DOORS ........................................20-21 SAFETY BELTS......................................23 CHILD SAFETY ......................................24 HEATING / VENTILATION .................................... 25 BI-FUEL VEHICLE SPECIFICATION ..............................26-30 CONTROL DEVICES & SIGNAL ................................32-37 IGNITION/DRIVING (IN CNG MODE) ................................ 39 FUEL ECONOMY ....................................45-48 NECESSARY CHEKS BEFORE TRAVELING ............................55 WINTER MAINTENANCE ..................................

  • Page 6: Table Of Contents

    YOUR VEHICLE AT A GLANCE VEHICLE’S COMPONENTS..........6-8 MAIN SWITCH..............14 KEYS ................. 9 UNLOCKING STEERING WHEEL ........14 DOORS ................9 STARTRING ..............14 SEAT ................... 9 MOTION TRANSFER SYSTEM ........15 CNG PARTS*..............10 SCREEN WASHER AND SCREEN WIPER…...…..….15 TURNING ON AND DRIVING BY CNG FUEL*..…10 WASHER RESERVIOR ..........

  • Page 7: Vehicle's Components

    PICKUP AT A GLANCE Vehicle components 6- Fuel type conversion switch* 7- Heating knob 1- Indicator stalk, horn & changing 8- Gear lever headlamp high/low beam 9- Ashtray 2- Ventilator 10- Heater outlet 3- Instrument panel 11- Glove box 4- Ignition switch...
  • Page 8 PICKUP AT A GLANCE...
  • Page 9 PICKUP AT A GLANCE Vehicle components 6- Electronic control unit (ECU) box 7- Electronic control unit (ECU) 8- Double relay 1- Cigarette ashtray 2- Radio housing 3- Air temperature adjustment lever 4- Air flow adjustment lever 5- Key of fuel type selection...

  • Page 10: Keys

    PICKUP AT A GLANCE Keys Seat Rail seat Buyer receives two sets of key. Driver’s seat is equipped with the control This lever is located only on the driver’s lever for adjusting the seat regarding seat. The point is that both backrest Doors driver’s height.

  • Page 11: Cng Parts

    PICKUP AT A GLANCE CNG parts* Starting on CNG mode * Two main sets have been added to make Changing the type of fuel is done by the Warning your vehicle to run on gas fuel: fuel conversion key located on the front...

  • Page 12: Cng Parts Located In Loading Part

    PICKUP AT A GLANCE CNG parts in boot 2- CNG Tank (Cylinder) Valve: In the case of any leakage in clamps, gas This device opens or closes the gas valve conditioning system will lead the gas out and includes the equipment for safety of of the cabin.

  • Page 13: Parts In The Engine Compartment

    PICKUP AT A GLANCE CNG parts placed in the engine compartment* 1- Regulator 2- The hose transferring gas from the regulator to gas adjusting valve 3- Gas flow adjuster 4- The hose transferring gas from adjusting valve to mixer 5- Mixer...

  • Page 14: Engine Bonnet

    PICKUP AT A GLANCE Bonnet To open the bonnet completely, pull the Use the bonnet stay to hold the bonnet latch lever towards the left, and then open open (3). How to open the bonnet the bonnet (2). To loose the bonnet latch, pull the bonnet lever (1), under the instrument panel cluster, on the driver’s side towards you.

  • Page 15: Main Switch

    PICKUP AT A GLANCE Caution -Never start moving while engine is cold. -Never start engine in a confined area -Do not alter steering wheel lock system - Never turn off the engine while going down the hill (the brake booster will be damaged).

  • Page 16: Motion Transfer System

    PICKUP AT A GLANCE Gearbox Wind screen washer (c) Windscreen Washer Fluid Reservoir: Pull the stalk towards steering wheel and Regularly check windscreen washer fluid Gear lever keep it for a while to spray the liquid in the reservoir (inside engine). Always use liquid It is installed at the protuberances of the water reservoir.

  • Page 17: Heating

    PICKUP AT A GLANCE Left lever position (1) (a)Maximum Heating (b)Minimum Cooling By moving the shift lever between (a) and (b) positions, you can reach to the desired heating/cooling. Right lever position (1) (c) Turning the Ventilation Off (d) Moving Airflow Upward...

  • Page 18: Warning Signs

    PICKUP AT A GLANCE Warning lamps 1- Horn: Press the end of the stalk. 2- High beam indicator lamp/light: Pull the stalk towards the steering wheel. 3- Indicator lights: - Right: Pull the stalk upwards. - Left: Pull the stalk downwards.

  • Page 19: Child Safety

    PICKUP AT A GLANCE Child safety Iran Khodro has observed all safety issues when manufacturing the vehicle. However, you should be very cautious when traveling with children. To avoid any possible incident, keep following points in your mind: 1- Take care of the child hands when...
  • Page 20 BEFORE DRIVING DOORS................…20-21 SEATS……………….............22 SAFETY BELTS………..........………23 SAFETY CARES……....………………………………24 HEATING……………………………........25 BI-FUEL VEHICLES FEATURES*……....……26-30 * If equipped...
  • Page 21 DOORS Keys Caution Two sets of keys are given to customer. To lock the doors while the bonnet release Doors: Doors can be closed or opened in lever is pushed toward the rear of the two ways: car, never push the handle; otherwise, it damages the lock and the lever.

  • Page 22: Doors

    DOORS Bonnet To open the bonnet completely, pull the Use the bonnet stay to hold the bonnet How to open the bonnet: latch lever towards the left, and then open open (3) the bonnet (2). To loose the bonnet latch, pull the bonnet Locking of bonnet lever (1), under the instrument panel Press on the bonnet to be locked.

  • Page 23: Seats

    SEATS Seat Rail seat Driver’s seat is equipped with the control This lever is located only on the driver’s lever for adjusting the seat regarding seat. The point is that both backrest driver’s height. To adjust the seat (1), pull seats (driver and passenger) can not be the leaver towards door (driver’s side) adjusted.In the case of passenger seat.

  • Page 24: Safety Belts

    SAFETY BELTS Seat belts Wear your seat belt at all times; it is mandatory by regulations and important for your safety. Seat belt will keep you safe in case of any accident (even a minor one). Adjust your seat. Make sure the seat belt is not twisted and has no contact with sharp edge parts.

  • Page 25: Safety Cares

    SAFETY CARES Child safety Special cares for children Warning Iran Khodro has observed all safety issues Never allow a child to travel on lap of the Child should never travel on the lap of when manufacturing the vehicle. However, front passenger. the passengers.

  • Page 26: Heating

    HEATING Left lever position (1) (a)Maximum Heating (b)Minimum Cooling By moving the shift lever between (a) and (b) positions, you can reach to the desired heating/cooling. Right lever position (1) (c) Turning the Ventilation Off (d) Moving Airflow Upward (e) Moving Airflow Downward Air intake adjustment (2) Lever (a):Adjusting Air Supplying Lever(b): Controlling and Adjusting the Airflow...

  • Page 27: Bi-Fuel Vehicles Features

    BI-FUEL VEHICLES FEATURES Bi-fuel vehicles features CNG parts* Vehicle industry and environment researcher Two main sets have been added to make have focused on replacing common fuel your vehicle to run on gas fuel: with new fuels which can maintain the A- Kit efficiency of the vehicle while having less B- Cylinder and its accessories...
  • Page 28 BI-FUEL VEHICLES FEATURES CNG parts placed in the engine compartment* 1- Regulator 2- The hose transferring gas from the regulator to gas adjusting valve 3- Gas flow adjuster 4- The hose transferring gas from adjusting valve to mixer 5- Mixer 6- Engine harness (Wires set) 7- Electrical control unit (ECU) 8- Advancer...
  • Page 29 BI-FUEL VEHICLES FEATURES 1. Regulator: such as a fuel injection or ignition system A valve for regulating the pressure of and controls engine performances through flowing gas to maintain a constant pressure transmission signals to the actuators. (from max.200 bar to 1 bar in three steps) 8.
  • Page 30 BI-FUEL VEHICLES FEATURES CNG parts in boot* 2- CNG tank (cylinder) valve: 4- Filler: 1- Gas reservoir: This device opens or closes the gas valve Once the filling nozzle is properly clamped The compressed natural gas is stored and includes the equipment for safety of to the filler neck, the gas starts to flow into under maximum 200 bar pressurized the system as follows:...
  • Page 31 BI-FUEL VEHICLES FEATURES Warning -Installation of the additional equipments We strongly recommend you to use only the equipment approved by the manufacturer which are compatible with your vehicle and guaranteed, otherwise there may be some fault in the proper function of the vehicle and its safety. -Electric and electronic equipments Any alteration on the electric circuits of the vehicle should only be done by the one of the authorized dealers;...
  • Page 32 DRIVING CONTROLS..............32-37 LIGHTS POSITION OF FUEL SELECTION KEY.....43-44 GEAR BOX................38 MAIN SWITCH..............45 ANTI-LOCK BRAKING SYSTEM (ABS)………………...…..39 CNG REFUELING STAGES..........46 IMPORTANT POINTS WHILE USING ANTI LOCK BRAKING SAVING FUEL CONSUMPTION........47-50 SYSTEM ................40 SCREEN WASHER AND SCREEN WIPER......51 SWITCHING ON AND DRIVING WHILE USING CNG ..41- 42...

  • Page 33: Controls

    CONTROLS...
  • Page 34 CONTROLS Warning lights 6- Battery charge (Red): The light illuminates as a bulb check when the 1- High coolant tempreature (Red light): starter switch is turned on and extinguishes Warning If the water temperature increases over 102-105 ◦ c, the water warning light comes as soon as the engine is running.
  • Page 35 CONTROLS 9- Coolant temprature gauge: vehicle has been driven. The trip meter can The coolant temperature turns warm be used to measure the distance traveled while the engine starts (If the engine is on short trips or between Warning cold, the temperature gauge will not move Never drive with the engine speed 11- Trip recoreder zero reset: till the coolant reaches the acceptable...
  • Page 36 CONTROLS Warning lamps The stalk returns automatically to the first position, While the wheel is returning. 1- Horn: Press the end of the stalk. Turning on the lights: 4- The lights will get on and off by turning 2-High beam indicator lamp / light: of indicator stalk.
  • Page 37 CONTROLS Head lamps Adjusting head lamp main beam (1) By turning the screw clockwise or anti- Each head lamp assembly consists of clockwise direction, you can adjust dipped one 40 or 45 lamp with two connectors, beam or main beam. one 5 watt lamp and one reflector (with the glass bulb).
  • Page 38 CONTROLS Adjustment (b) Headlamps High Beam Changer Lamps If the headlamps high beam is on, by pushing headlamp main beam, direction indicator Rear lamp: the steering wheel towards windscreen, the and horn It consist of (1): headlamps high/low beam changes to other Headlamps main beam, direction indicator (a) Rear Direction Indicators position.

  • Page 39: Gear Box

    GERABOX Mechanical converter gearbox Always use the first gear to start the New position of brake lever vehicles; otherwise, the clutch will soon Brake lever position has been transferred Gear lever be abraded .To transfer the gear to the from side part of the cabin to the middle part It is installed at the protuberances of the reverse gear, put the palm of the hand on ( between two chairs) .

  • Page 40: Anti-Lock Braking System (Abs)

    ANTI-LOCK BRAKING SYSTEM (ABS) Anti-lock braking system (ABS) New navigation and stability system such Anti-lock braking system is one of the car as ABS prevent wheels from locking Warning control systems preventing the wheels in these situations, which may cause This system shall not be deemed from locking on slippery roads, or intense critical driving situations.

  • Page 41: Important Points While Using Anti Lock Braking System

    ANTI-LOCK BRAKING SYSTEM (ABS) When using a car equipped with anti this situation the car should be directed to lock brake system always consider the an authorized workshop with precaution. following points: - If the handbrake is completely released Caution - Since the anti lock brake system is only the handbrake indicator and anti...

  • Page 42: Switching On And Driving While Using Cng

    SWITCHING ON AND DRIVING WHILE USING CNG Warning Starting on CNG mode (1) - ** This mode shall only be used in emergency situation such as lack of gasoline. Changing the type of fuel is done by the This mode is not recommended in normal conditions because it may damage the gas- fuel conversion key located on the front powered parts.
  • Page 43 SWITCHING ON AND DRIVING WHILE USING CNG A) Operating on CNG mode before the 4 green lights of the conversion key C) Turning the engine on CNG starting mode directly are turned on in compliance with the gas pressure inside the gas pump. Start the engine then put the fuel This method is used only for special conversion key on gas.

  • Page 44: Lights Position Of Fuel Selection Key

    LIGHTS POSITION OF FUEL SELECTION KEY Fuel conversion keys positions of Conversion key positions lamps (Gasoline to gas)* Considering the consumptive fuel type The yellow light at the right side is on and and the amount of CNG fuel in the pump, the left green light as well as red gas saving the position is as follows: light is set on blinking mode (the blinking at...
  • Page 45 LIGHTS POSITION OF FUEL SELECTION KEY Notice If you have trouble starting the car in gas mode, set the fuel conversion keys to gasoline position and start the vehicle. If the engine does not start again, consult with an authorized dealer. Fuel conversion keys in gas running out position* When the gas inside the container is near...

  • Page 46: Main Switch

    MAIN SWITCH Ignition key Unlocking the steering wheel Caution Put the key at I position. There are 4 positions Never turn off the engine while going Move the steering wheel gently while O. The steering wheel lock and ignition off. down the hill (the brake booster will be turning the key.

  • Page 47: Cng Refueling Stages

    CNG REFUELING STAGES CNG Fueling steps* 4) Make sure of closing the gas filler valve overhead after each fuel injection. (It’s Caution 1) During fueling at gas stations, avoid essential to prevent entering dust and We strictly recommend all the owners smoking or using your cell phone.

  • Page 48: Saving Fuel Consumption

    SAVING FUEL CONSUMPTION Factors determine the fuel Fuel feeding system: consumption: To prevent oil leakage, check the fuel injection feeding system for fuel rail, fuel The condition of the engine: filler pipes, fuel pump and fuel filter. A badly tuned engine adds fuel consumption. Fuel quality: Ignition system: Fuel quality does affect not only on the...
  • Page 49 SAVING FUEL CONSUMPTION Heat shield of exhaust manifold A- Vehicle maintenance Notice Maintenance & services of car should be For the purpose of elimination the exhaust Clogged air filter reduces the engine performed according to the recommended manifold heat radiation effect on throttle power.
  • Page 50 SAVING FUEL CONSUMPTION B-Driving style After raising the engine coolant temperature hard accelerations- keep pace with the - Keep a steady cruising speed: Keep up to normal range, drive the car quietly traffic flow. as constant a speed as road and traffic and avoid from extra acceleration.
  • Page 51 SAVING FUEL CONSUMPTION Improving fuel economy Periodic maintenance should be done only in one of the Iran Khodro authorized Periodic maintenance schedule shops. Special place considered in the included in the Service and Guarantee service book for each service should be book.

  • Page 52: Screen Washer And Screen Wiper

    SCREEN WASHER AND SCREEN WIPER (c) Windscreen washer fluid reservoir Wind screen washer Warning Pull the stalk towards steering wheel and Regularly check windscreen washer fluid Never use anti-freeze and water mixture keep it for a while to spray the liquid in the reservoir (inside engine).
  • Page 53 Caution Before starting driving at night: Make sure electrical equipments function properly and adjust vehicle lights (in case of over loading). In general, make sure the lights are not covered (by dirt, mud, snow or any other object. Warning Should the vehicle is going not to be used for more than 6 days, it should be started at least once and work one hour idle.
  • Page 54 VEHICLE MAINTENANCE MAINTENANCE ..............54-56 COOLING SYSTEM ............66-67 NECESSARY POINTS BEFORE TRAVELING ....….57 WASHING AND MAINTAINING THE VEHICLE....68-70 WINTER PRECAUTIONS..........58-59 BODY STAIN REMOVING ............71 TIRES……..........…..…..………. 60 CHANGING OIL ..............72 ACCESSORY BATTERY............61 OIL TYPE…............………73-74 BATTERY SERVICE AND MAINTENANCE....…62-63 INSPECTION AND REPLACING OIL……....….75-77 ALTERNATOR AND FAN BELT………......……..64 INSPECTION AND REPLACING FILTERS ......78 SAFETY CARES..............65...

  • Page 55: Maintenance

    MAINTENANCE Handbrake Accelerator pedal To release handbrake, pull the lever a little Always depress the accelerator pedal Caution upward and push the button at the end smooth and gradually. Rapid depressing of lever with your thumb, then move the of accelerator pedal may cause engine - Never drive the car in slops with neutral gear, either with the engine on or off.
  • Page 56 MAINTENANCE Running-in of engine and gearbox In first 800Km of driving, the maximum speed must be kept in following limits: The running-in of a new engine, gearbox Caution First gear 15 Km/h and differential are very important, which Should the vehicle is going not to be Second gear 30 Km/h should be taken under care of driver, used for more than 6 days, it should...
  • Page 57 MAINTENANCE Brake pedal Avoid sudden brake and stoppage of your vehicle. Use heavy gears, 1 or 2, while running downhill to reduce unnecessary and continuous brakes. To increase the brake safety a mechanical brake button (STOP) has been added. After driving through a large puddle of water or a car wash, apply your brake pedal lightly until your brakes work normally.

  • Page 58: Necessary Points Before Traveling

    NECESSARY POINTS BEFORE TRAVELING Checks / Adjustments before a journey 1- Engine Oil 2- Coolant Level 3- Clutch & Brake Fluid 4- Windscreen Washer Fluid 5- Windscreen washer/ wiper nozzles 6- Fuel Level 7- Check Tire pressures. 8- Check Front / Rear Lamps 9- Gas pressure level inside the reservoir.

  • Page 59: Winter Precautions

    WINTER PRECAUTIONS Preparation for winter cooling system Winter tires The car is containing of approved anti- Two types of winter tires can be used: freeze solution. This solution retains the 1-Winter tires: Must be used on rear Warning system down to -15 ºC (In some countries wheels -Should the screen wiper blades are down to- 35ºC).
  • Page 60 WINTER PRECAUTIONS Door locks and door rubber seal - Smear the door locks with graphite lubricants. -Smear the door rubber seals with paraffin. Passenger air intake Look for opening of external air spoiler (At the bottom of front windshield), which is not clogged in any way by snow, ice or leaves.

  • Page 61: Tires

    TIRES The role of tires at protecting the safety Consequences: If abrasion appeared Abrasion Index and improving the driving is vital and on some part of spokes of the tire is not In some tires the corruption of tires is important.

  • Page 62: Accessory Battery

    ACCESSORY BATTERY Spare battery Consumption battery in this automobile is of 12 volt and 60-ampere and in case of Warning de-charging battery; it can be charged by Batteries contain sulfuric acid which is another vehicle of an auxiliary battery (12 very corrosive.

  • Page 63: Battery Service And Maintenance

    BATTERY SERVICE AND MAINTENANCE Maintenance of the battery Best maintenance for batteries 1-Check the battery terminals (poles) to be -Fasten battery firmly in its place. Caution clean of the sulfated residue. Clean them -Keep top of the battery clean and dry. -Batteries emit Hydrogen...
  • Page 64 BATTERY SERVICE AND MAINTENANCE Jump starting - Do as follows: Warning 1- Connect a cable from auxiliary battery’s Should you use auxiliary battery positive terminal to the positive terminal of improperly, it causes dame to the the flat battery. vehicle and battery. So observe 2- Connect a cable from auxiliary battery’s followings strictly: negative terminal to a heavy metal part...

  • Page 65: Alternator And Fan Belt

    ALTERNATOR AND FAN BELT Fan belts tensioning adjustment The drive belt is correctly tensioned, when a total movement of 16mm can be obtained on the largest deflection of the belt. To adjust the tensioning of belt, first loosen the alternator mounting bolts as shown in figure and move the alternator for reaching to correct tensioning amount.

  • Page 66: Safety Cares

    SAFETY CARES Ignition system of pickup engine Due to higher voltage in electronic ignition is provided in this switch. There is a globe systems, compared with common which in case of applying a shock to a Bardo engine ignition is of electronic...

  • Page 67: Cooling System

    COOLING SYSTEM Warning Cooling system fan is electrical and may continue working a few minutes after the engine is switched off. To help preventing personal injury, keep away from working fan while engine compartment cover is open. Engine coolant system (Radiator) Flowing out radiator water Warning When water temperature at the radiator...
  • Page 68 COOLING SYSTEM Re-filling the radiator Clean the radiator once in two years. paint so while using them we can give precise This is highly required when you use water attention, then evacuate the cleansing solvent 1- Put the controlling lever of heater on warm including settled solvents, which contain lime and wash it by tubes again and close the 2- Close the evacuation valve under the radiator...

  • Page 69: Washing And Maintaining The Vehicle

    WASHING AND MAINTAINING THE VEHICLE Recommendations for washing the 8- Suitable detergent for washing vehicle: parts of the vehicle from top to bottom. vehicle Wash Aluminum wheels and Chrome - Low basic (PH=7-9) metal sheets with a water and mild soap - Proper lubricant to protect the paint from 1- Wash vehicle at least once per week using a soft and clean cloth.
  • Page 70 WASHING AND MAINTAINING THE VEHICLE General hints for washing various part of the vehicle Warning Type of stain Leather and plastic parts Fabric upholstery -Never use detergents, abrasive or Lukewarm soap water Commercial detergents chemical products Commercial detergents Acetic acid -Do not wash seat belt by whitening Lukewarm soap water Ammonia solvent 25% borax...
  • Page 71 WASHING AND MAINTAINING THE VEHICLE Maintaining the body Never: park wet vehicle in a very warm (more than 18 Celsius degree) and confined area. - Do not forget washing the vehicle after driving on the snow and salty mud (especially under the body and mud apron.

  • Page 72: Body Stain Removing

    BODY STAIN REMOVING Spotting out Any damages to the vehicle paint shall be cleaned out to prevent corrosion of the vehicle. Body color number has been indicated on the identification plate (refer to the dimension section). Necessary tools for spotting out: Paint scraper , Anti-rust , Small brush If the damage is sever and the body metal is noticeable...

  • Page 73: Changing Oil

    CHANGING OIL Oil types The frequency and routine change of oils Notice in different parts of car is essential factor -The oil must be checked every 400 for improving durability and long-lived. kilometer. To make sure, please Therefore oil service should be taken into inspect with the specific indicator.
  • Page 74 OIL TYPES* Component Oil type* Capacity 4.5 litter with filter Engine 10 W 40 - 20 W 50 3.97 litter without filter Gearbox (4 speed) 85 W 90 2 litter Differential 85 W 90 1.2 litter Steering Box 85 W 90 0.32 litter Brakes &...

  • Page 75: Oil Type

    OIL TYPES Component Oil Types Battery Clamps Multi Purpose Grease (Grade2) Hinges, Handles & Locks Engine Oil Front Wheel Hubs Multi Purpose Grease (Grade2) Handbrake Spring Multi Purpose Grease (Grade2) Warning - If you drive vehicle with high speed for a long time, check its engine oil level frequently.

  • Page 76: Inspection And Replacing Oil

    INSPECTION AND REPLACING OIL Warning - When working on the engine, be careful. Engine of the radiator fan may start working anytime and cause injury. - Adding- when adding oil, be careful not to pour it on the other parts. There is the risk of firing.
  • Page 77 INSPECTION AND REPLACING OIL Differential oil This track is blocked by the rubber lead above the steering Reservoir. Always When delivering car, the differential box use the certified oils and pay attention to has been filled with oil. The oil should cleanse the lead and outlet edges while be checked in every step of periodical pouring oil and after that the said lead...
  • Page 78 INSPECTION AND REPLACING OIL Warning -Brake fluid is very poisonous and should be kept in a closed container out of reach of children. If it is swallowed please refer immediately to a doctor. -Avoid contacting of the brake fluid with skin and eye. Should it pours on the skin;...

  • Page 79: Inspection And Replacing Filters

    INSPECTION AND REPLACING FILTERS Change of air filter (Picture 1 and 2) The oil vapor conditioner and penetrating gases of carter reservoir To change air filter easily, the filter housing has been fixed on the car body. To remove To remit the penetrated gases inside the filter, just open the two clamps on the filter.
  • Page 80 TECHNICAL EMERGENCIES REPLACING TIRES..............80-81 REPLACING LAMPS............82-83 FUES BOX..................84 TACKLING METHOD IN CASE OF GAS LEAKAGE....85 REPLACING FILTER..............86 * If equipped...

  • Page 81: Replacing Tires

    REPLACING TIRES Caution - The wheels must be balanced. - Never use jack to repair while going under the vehicle - To regulate the safety issues, check the air pressure of the wheels, including spare wheel, while the tires are cold. Warning Wheels replacement - Put the Jack at a special place (1) and...
  • Page 82 REPLACING TIRES Spare wheel Tools located under the seat Tool bag contains (Passanger side) It is located under the passenger’s side 1- Ignition wrench seats. Open it by a finger press (1). Replace 1- Jack and Spare Tire 2- Open end wrench 7.16 and 3.8 the wheels, according to the pictures.

  • Page 83: Replacing Lamps

    REPLACING LAMPS Replacing headlamp (2) Changing lamps Replacing instrument panel warning lamps - Open the grill Unscrew 1, 2, 3 and 4 screws (1) and - Remove the bayonets around the lamps remove the cover. Push the used lamp All the warning lamps could be accessible - Loose the main beam headlamp assembly inside, turn it and then remove it.
  • Page 84 REPLACING LAMPS Lamp specifications table Lamp location Watt Volt contacts Front / Rear Direction Indicator 21 watt 12 Volt Head lamp 40 and 45 Watt 12 Volt Main/Dipped Headlamp Brake lamp 21watt (front) and 5 watt (Rear) 12 Volt Main/Dipped Headlamp License Plate Lamp 5 watt 12 Volt...

  • Page 85: Fues Box

    FUSE BOX Fuse box Electrical parts for each fuses (1). Ten fuses are set up in the fuse box of the vehicle. These fuses are placed at the plastic box engine Fuses No. Fuse type Electrical parts related to every fuse parts.

  • Page 86: Tackling Method In Case Of Gas Leakage

    TACKLING METHOD IN CASE OF GAS LEAKAGE Notice - any manipulation and doing repairs and maintenance of the gas system by unauthorized people. - It spoils the guaranty conditions and possible damages and losses. Repairing shop personnel only does so all the repairs. -any repair at sumps such as replacement or repairing the sump Tackling method In case of happening...

  • Page 87: Replacing Filter

    REPLACING FILTER Do you know... Decrease of the fuel consumption That main function of the vehicle’s gasoline Replace your van gasoline filter by filter is refinement and filtering the impurities standard filter latest after each 20000 km in the gasoline and improving the fuel driving.
  • Page 88 TECHNICAL INFORMATION PLATE AND SPECIFICATIONS LABEL…......88 HOW TO CHANGE THE FUELING PERMIT LABEL.....89 DIMENSIONS AND GENERAL CHARACTERISTICS..90-93 CPACITIES................94...
  • Page 89 PLATE AND SPECIFICATIONS LABEL Vehicle identification number While corresponding to organization after Specifications label sales services or other orgs, possibly When you open the engine door, there is a To get the access to some vital information stipulate you identify. By means the engine metal plaque on the inside surfaces of the and tested for different types of oils.
  • Page 90 HOW TO CHANGE THE FUELING PERMIT LABEL How to change the fueling label Caution The validation period of this label is 12 We strictly recommend all the owners months and you are not authorized to of CNG vehicles to avoid fuel injection inject fuel of your automobile without it.
  • Page 91 DIMENSIONS AND GENERAL CHARACTERISTICS CNG fuel consumption The consumption is in 100 Km based on Pickup ECE R83/03 standard; and according to Ring Size 4.5 J* 13 Component Oil type ** Capacity the following table: Tire Size 590*13 Fuel consumption Front* 27psi 24psi 4.5 litter with...
  • Page 92 DIMENSIONS AND GENERAL CHARACTERISTICS Weight (kg) General specifications General specifications Bardo pickup Final drive reduction ratio 3.89:1 960 kg Gearbox - Manual 4-Speeds + Reverse 1210 kg Gasoline Max. Speed in 1st gear 39 Km/h 500 kg Max. Cargo load Max.
  • Page 93 DIMENSIONS AND GENERAL CHARACTERISTICS General Specifications Pickup 2 Engine type (Capacity) Four Cylinder, Four Stroke, Internal Combustion 1598CC Number of main bearings Cylinder bore 87.3 mm Cylinder type Equipped with valve seat bush Piston stroke 66.7 mm Max. engine torque 133 Nm at 3000 RPM Max.
  • Page 94 DIMENSIONS AND GENERAL CHARACTERISTICS Length(bumper to bumper) 4232 Length bet. Rear and front tires 2505 Length bet. Two front tires 1321 Length bet. Two rear tires 1321 Width of the vehicle 1620 Vehicle height, Net weight 1422 Vehicle height from the earth...
  • Page 95 CAPACITIES Engine oils (without filter) 3.97 lit. Oil filter 0.56 lit. Gear box oil 2 lit. Differential oil 1.1 lit Braking fluid 0.568 lit. Gasoline tank 45.45 lit. Cooling system with heater 7.2 lit. Capacity of the screen wiper 1.4 lit. Steering box oil 0.32 lit.
  • Page 96 ALPHABETICAL INDEX...
  • Page 97 INDEX Accelerator pedal Dimension and general characteristics 90-93 Handbrake Adjusting head lamp light Do you know? Handbrake applied warning light Alternator and cooling fan belt Door open warning light Head lamps Alternator charge indicator lamp Doors 9,20 Heating 16,25 Driving 31-52 How to change the label of the fueling permit 89 Anti-glare and small lights indication lamp...
  • Page 98 INDEX Maintenance of the vehicle body Motion transfer system Screen washer and windshield wiper Vehicle identification plate Screen wiper reservoir 15,51 Vehicle parts Seat 9,22 Oil pressure indication lamp Seat belt Oil types Selection of the CNG fuel before driving 42 Warning signs Oil Vapor and gas penetrated to the Selection of the CNG fuel while driving 42...

This manual is also suitable for:

Bi-fuel pickupBi-fuel bardo pickup

Table of Contents